SYSTEM -BAS306T8
TYPICAL APPLICATION
Flow rate:70m³/h (308gpm) to 290m³/h (1277gpm), Accuracy: 50 micron to 600 micron;
Agriculture irrigation -Â applicable to medium scale agriculture irrigation, removing the particles from water drawing
from the lake,river etc. Protecting the sprayers of the irrigation system.
Garden irrigation -Â provide solutions for the water recycling of garden irrigation or water landscape, ensure the
water quality ,and protecting the sprayer and the dropper.
Industrial filtration -Â provide solutions for low flow water recycling in industrial applicaition.
HOW IT WORKS
FILTRATION STAGEÂ - Under the command of the controller, the dirty water flow into to the filters in filtration stage via the back-flushing control valves, then the Vortex and the disc keeps the particles in the grooves of the discs,the clean water flow into the outlet pipe.
BACKWASHING STAGE - Under the command of the controller, only one of filter starts back-flushing at a time. The back-flushing control valves change the water flow direction, then the filtered water is introduced in adverse through the filtering element which decompresses the stack of discs for the backwash procedure. The solids are expelled from the discs and discharged through the drain manifold. The filtration process starts again after finishing the back-flushing stage. The filter will start back flushing successively until all filters were finished to clean.
MODULAR BAF080T SPECIFICATION
Â
Modular Model | Unit | BAF080T |
 |
|||
Filtering Surface | cm² | 1020 | ||||
Filtration Grades | micron mesh |
600Â Â Â 200 30Â Â Â Â 80 |
130Â Â Â 100 120Â Â Â 150 |
50 300 |
||
Quality of Water | Good | m³/h gpm |
40 176 |
36 159 |
32 141 |
|
Average | m³/h gpm |
34 150 |
32 141 |
28 123 |
||
Poor | m³/h gpm |
26 114 |
24 106 |
20 88 |
||
Very Poor | m³/h gpm |
16 70 |
14 62 |
10 44 |
BAS304T6 TECHNICAL DATA
Model |
Unit No. |
Filtering Surface |
Manifold |
Max. Flow |
Weight |
BAS306T8 |
6 |
8952 |
8 Â Â 200 |
216 Â Â 951 |
185 |
SIZE DATA
Model | L mm  in |
W mm  in |
H mm  in |
I mm  in |
O mm  in |
D mm  in |
E mm  in |
BAS306T8 | 1790 Â 70.5 | 960Â Â 37.8 | 1110 Â 43.7 | 575 Â 22.6 | 270 Â 10.6 | 230 Â 9.1 | 300Â Â 11.8 |
VARIOUS MODEL FOR YOUR CHOOSE
ALL TÂ TYPE AUTO DISC FILTRATION SYSTEM
T Type Auto Disc Filtration System | |||||||
Type | Model |
Unit  No. |
Filtering Surface |
Manifold (in/mm) |
Max Flow (m³/h) (gpm) |
Weights (kg)(lb) |
L*W*H (mm) |
2'' Series BAF050T Units) |
BAS202T3 | 2 | 2040 | 3Â Â Â 80 | 40 178 | 43Â Â 95 | 710*800*880 |
BAS203T4 | 3 | 3060 | 4Â Â 100 | 60Â Â 284 | 57 126 | 970*800*880 | |
3'' Series BAF080T Units) |
BAS302T4 | 2 | 2984 | 4Â Â Â 100 | 72 317 | 50Â Â 100.2 | 670*880*1050 |
BAS303T4 | 3 | 4476 | 4Â Â 100 | 108Â Â 475 | 57Â Â 125.7 | 950*880*1050 | |
BAS304T6 | 4 | 5968 | 6Â Â 150 | 144Â Â 634 | 104Â Â 229.3 | 1330*910*1080 | |
BAS305T6 | 5 | 7460 | 6Â Â 150 | 180 792 | 129Â Â 284.4 | 1510*910*1080 | |
BAS306T8 | 6 | 8952 | 8Â Â 200 | 216Â Â 951 | 185Â Â 407.9 | 1790*960*1110 | |
BAS307T8 | 7 | 10444 | 8Â Â 200 | 252Â Â 1109 | 216Â Â 476.2 | 2070*960*1110 | |
BAS308T8 | 8 | 11936 | 8Â Â 200 | 288Â Â 1268 | 246Â Â 542.3 | 2350*960*1110 |
VARIOUS INSTALLATION DIRECTION
The direction of outlet/inlet/drain can be chosen according to the installed situation.
APPLICATION
OUR FACILITIES AND SHOW ROOM
Â
COMPANY PROFILE
 BALDR  was founded in October 2012. BALDR is a professional environmental equipment manufacturer. We are committed to developing and producing equipment of the water treatment,  water filtration systems and air deodorization.  BALDR products are widely applied in agriculture irrigation, urban landscape irrigation, golf course irrigation, industrial water recycle and municipal industrial air deodorization.
Our company is located in Fuzhou China and has more than 300 employers. There are three major teams: international sales team, the domestic sales team with engineering background, and the R&D team. Our R&D center is of high capacity in the design of the software, electronic hardware, structural engineering, 3D engineering, molding and industrial application. Our company has 1500 m2 office, 500 m2 R&D Center, 300m2 show room, and we also possess10000 m2 modernized industrial plants including the molding, plastic injection, metal stamping, electronic appliances and assembly lines. Our company is very strong in supplying chain management, integrated production and manufacturing. The independent production rate is more than 60%.Â
Â
OUR SERVICE
1. OEM/ODM services are accepted.
2. Technical support and design personalized solutions by the engineer team.
3. Accept sample order.
4.Quality tracking &Â service.
5.Provide the free catalog for you.
6.Various irrigation products for your choice.
7.Warranty: 1Â year.Â
Â
Contact us
Jessica Yang|  Sales ManagerÂ
Mobile: +86-13705915005
TEL: 0086-591-28307925
Website: www.baldr.com.cnÂ
SYSTEM -BAS306T8
TYPICAL APPLICATION
Flow rate:70m³/h (308gpm) to 290m³/h (1277gpm), Accuracy: 50 micron to 600 micron;
Agriculture irrigation -Â applicable to medium scale agriculture irrigation, removing the particles from water drawing
from the lake,river etc. Protecting the sprayers of the irrigation system.
Garden irrigation -Â provide solutions for the water recycling of garden irrigation or water landscape, ensure the
water quality ,and protecting the sprayer and the dropper.
Industrial filtration -Â provide solutions for low flow water recycling in industrial applicaition.
HOW IT WORKS
FILTRATION STAGEÂ - Under the command of the controller, the dirty water flow into to the filters in filtration stage via the back-flushing control valves, then the Vortex and the disc keeps the particles in the grooves of the discs,the clean water flow into the outlet pipe.
BACKWASHING STAGE - Under the command of the controller, only one of filter starts back-flushing at a time. The back-flushing control valves change the water flow direction, then the filtered water is introduced in adverse through the filtering element which decompresses the stack of discs for the backwash procedure. The solids are expelled from the discs and discharged through the drain manifold. The filtration process starts again after finishing the back-flushing stage. The filter will start back flushing successively until all filters were finished to clean.
MODULAR BAF080T SPECIFICATION
Â
Modular Model | Unit | BAF080T |
 |
|||
Filtering Surface | cm² | 1020 | ||||
Filtration Grades | micron mesh |
600Â Â Â 200 30Â Â Â Â 80 |
130Â Â Â 100 120Â Â Â 150 |
50 300 |
||
Quality of Water | Good | m³/h gpm |
40 176 |
36 159 |
32 141 |
|
Average | m³/h gpm |
34 150 |
32 141 |
28 123 |
||
Poor | m³/h gpm |
26 114 |
24 106 |
20 88 |
||
Very Poor | m³/h gpm |
16 70 |
14 62 |
10 44 |
BAS304T6 TECHNICAL DATA
Model |
Unit No. |
Filtering Surface |
Manifold |
Max. Flow |
Weight |
BAS306T8 |
6 |
8952 |
8 Â Â 200 |
216 Â Â 951 |
185 |
SIZE DATA
Model | L mm  in |
W mm  in |
H mm  in |
I mm  in |
O mm  in |
D mm  in |
E mm  in |
BAS306T8 | 1790 Â 70.5 | 960Â Â 37.8 | 1110 Â 43.7 | 575 Â 22.6 | 270 Â 10.6 | 230 Â 9.1 | 300Â Â 11.8 |
VARIOUS MODEL FOR YOUR CHOOSE
ALL TÂ TYPE AUTO DISC FILTRATION SYSTEM
T Type Auto Disc Filtration System | |||||||
Type | Model |
Unit  No. |
Filtering Surface |
Manifold (in/mm) |
Max Flow (m³/h) (gpm) |
Weights (kg)(lb) |
L*W*H (mm) |
2'' Series BAF050T Units) |
BAS202T3 | 2 | 2040 | 3Â Â Â 80 | 40 178 | 43Â Â 95 | 710*800*880 |
BAS203T4 | 3 | 3060 | 4Â Â 100 | 60Â Â 284 | 57 126 | 970*800*880 | |
3'' Series BAF080T Units) |
BAS302T4 | 2 | 2984 | 4Â Â Â 100 | 72 317 | 50Â Â 100.2 | 670*880*1050 |
BAS303T4 | 3 | 4476 | 4Â Â 100 | 108Â Â 475 | 57Â Â 125.7 | 950*880*1050 | |
BAS304T6 | 4 | 5968 | 6Â Â 150 | 144Â Â 634 | 104Â Â 229.3 | 1330*910*1080 | |
BAS305T6 | 5 | 7460 | 6Â Â 150 | 180 792 | 129Â Â 284.4 | 1510*910*1080 | |
BAS306T8 | 6 | 8952 | 8Â Â 200 | 216Â Â 951 | 185Â Â 407.9 | 1790*960*1110 | |
BAS307T8 | 7 | 10444 | 8Â Â 200 | 252Â Â 1109 | 216Â Â 476.2 | 2070*960*1110 | |
BAS308T8 | 8 | 11936 | 8Â Â 200 | 288Â Â 1268 | 246Â Â 542.3 | 2350*960*1110 |
VARIOUS INSTALLATION DIRECTION
The direction of outlet/inlet/drain can be chosen according to the installed situation.
APPLICATION
OUR FACILITIES AND SHOW ROOM
Â
COMPANY PROFILE
 BALDR  was founded in October 2012. BALDR is a professional environmental equipment manufacturer. We are committed to developing and producing equipment of the water treatment,  water filtration systems and air deodorization.  BALDR products are widely applied in agriculture irrigation, urban landscape irrigation, golf course irrigation, industrial water recycle and municipal industrial air deodorization.
Our company is located in Fuzhou China and has more than 300 employers. There are three major teams: international sales team, the domestic sales team with engineering background, and the R&D team. Our R&D center is of high capacity in the design of the software, electronic hardware, structural engineering, 3D engineering, molding and industrial application. Our company has 1500 m2 office, 500 m2 R&D Center, 300m2 show room, and we also possess10000 m2 modernized industrial plants including the molding, plastic injection, metal stamping, electronic appliances and assembly lines. Our company is very strong in supplying chain management, integrated production and manufacturing. The independent production rate is more than 60%.Â
Â
OUR SERVICE
1. OEM/ODM services are accepted.
2. Technical support and design personalized solutions by the engineer team.
3. Accept sample order.
4.Quality tracking &Â service.
5.Provide the free catalog for you.
6.Various irrigation products for your choice.
7.Warranty: 1Â year.Â
Â
Contact us
Jessica Yang|  Sales ManagerÂ
Mobile: +86-13705915005
TEL: 0086-591-28307925
Website: www.baldr.com.cnÂ
Gym Rings,Gymnastic Rings At Home,Wooden Gymnastic Rings,Gym Ringe
nantong pinli fitness co.,ltd , https://www.ntcnpinlifitness.com