Model |
DNC-15AD |
|||
Nominal cooling capacity |
Kcal/h 50Hz/60Hz |
38270/45924 |
||
Kw 50Hz/60Hz |
44.5/53.4 |
|||
Max power consumption |
Kw |
17.45 |
||
Full load |
AMP |
42.4 |
||
Power source |
 |
3pH -Â 380V/415V -Â 50Hz /60NZ 3pH -200V/220V -Â 50Hz /60NZ |
||
Refrigerant |
Type |
 |
R22/R407c/134A/404A/410A |
|
Control |
 |
Capillary/external balance of thermal expansion valve |
||
Compressor |
Type |
 |
Hermetic scroll/Piston |
|
Power |
Kw |
7×2 |
||
Condenser |
Type |
 |
Efficient aluminum finned copper sleeve+low noise external rotor fan |
|
Air volume |
M3/h |
15000 |
||
Fan motor |
Kw |
0.6×2 |
||
Evaporator |
Type |
 |
Tank coil/Dry shell and tube /Stainless steel plate evaporate |
|
Tank volume |
L |
270 |
||
Coolant flow |
M3/h |
7.65 |
||
Inlet and outlet connection(BSP) |
Inch |
2 |
||
Pump |
Power |
Kw |
2.2 |
|
Max flow rate |
M3/h |
25.2 |
||
Max head |
M |
28 |
||
Safety devices |
Compressor overheating protection, over-current protection, high and low pressure protection, over-temperature protection, traffic protection, phase sequence/phase loss protection, low level protection, frost protection |
|||
Dimension |
mm |
1860*850*1900 |
||
Weight |
Kg |
580Â Â Â Â Â |
||
 |  |  |  |  |
Notes: 1. Cooling capacity is based on: Chiller water inlet and outlet water temperature of 12ºC/7ºC, the cooling water inlet and outlet water temperature of 30ºC/35ºC
2. Scope of work: Chilled water temperature range: 5ºCTO35ºC; Chiller water out of the water temperature: 3ºCTO8ºC
The cooling temperature is not higher than 35ºC environment
The above can be customized according to customer requirements to produce
Specification dimension above are subject to change without notice
Our Services:Â
ØWith decades years professional experience in refrigeration industry;Â
ØOEM/ODM services available, new design updates regularly;Â
ØWe offer all of products with 12 months warranty;Â
ØPrompt reply, fast delivery, professional after-sales service.Â
FAQ:Â
1. How to choose a proper Chiller?Â
Tip1. The cooling capacity.Â
Tip2. The inlet and outlet water temperature, and the environment temperature.Â
Tip3. The power.Â
Tip4. The rifrigeration you need.Â
Tip5. Other special requirments.Â
2. If the cooling capacity of Chiller bigger is better?Â
No.Â
The use of cooling capacity too large, will not only result in the waste of resources, but also the machine itself will produce more noise, therefore we must choose a appropriate chiller.Â
Martial Arts Mat is an EVA Mat, in double colors for reversible, in 100cm x 100cm, offering 2cm, 2.5cm, 3cm and 4cm thickness.
EVA martial arts mat is made from Eco-friendly, high density, closed cell, non-smell and non-toxic EVA foam material. With interlocking edges, each mat can be connected easily without any loose.
It is always used as EVA Tatami Mat, EVA Jigsaw Mat, EVA Taekwondo Mat, EVA Karate Mat, EVA Judo Mat, EVA Jiu Jitsu Mat and EVA Aikido Mat. The thick foam provides a protection for trainers when they fall on the floor. Also we have 3 different textures for surface of the mats, which is "T" texture, five strips texture and tatami texture. All of them provide a good traction to the feet.
The colors we usually offer for the martial arts mat is blue & red, blue & yellow, black & red, single black. Or we can offer customized colors based on customers` requirement.
We used heard many of customers complained about the bad experience on the bad smell mats they purchased from other supplier. Indeed, that may cost a lower even half of our price, it is because the EVA foam material is what we call second-hand material, its smell will make people uncomfortable. Melors promise that the EVA foam material we use would be never second-hand foam material, what we offer is truly non-smell and non-toxic.
Martial Arts Mat,Eva Martial Arts Mat,Eva Taekwondo Mat,Interlocking Jigsaw Mat,Tatami Interlocking Mat,Eva Karate Mat
Huizhou City Melors Plastic Products Co., Limited , https://www.evadecking.com