680 Ton High Efficiency Energy Saving Injection Molding Machine (AL-UJ/680C)

Posted on

  • Model NO.: U/680C
  • Structure: Horizontal
  • Plasticizing Way: Screw Type
  • Automation: Automatic
  • Certification: CE, ISO9001:2008, CQC
  • Trademark: ALLWAY
  • Origin: Ningbo China
  • Type: Injection Machine
  • Plastic Type: Thermoplastic
  • Clamping Way: Hydraulic & Mechanical
  • Computerized: Computerized
  • Servo System: Energy Conservation
  • Specification: CE, SGS, ISO9001: 2008, CQC
  • HS Code: 8477101090
Some of the important features:
 
Clamping system:  Faster response, stable and high rigidity
 
Injection system:    Accurate and flexible, lower rejection rate
 
Control system:     Computer and simple operation,molding data memory system
 
Power system:       Energy saving, high efficient and precise
 
Metal parts:         The thickness of our frame, metal plate and wallboard are thicker than other company.
       
 
Other Information
 
Show High Precision: The accurate injection positioning,pressure, speed and pressure maintaining,to ensure the repeatability error of injection accuracy less than 0.3% to achieve precision molding.
 
Super EnergySaving Features: Compared with standard injection machine,the energy saving rate can reach 40%-70% for the same plastic production.
 
High Efficiency: Compared  with standard machine,the total efficiency can increase by 10% and dragging capacity is can increase by18%.
 
High Response System:The system acceleration and deceleration performance is quite agile and force&speed regulation is very sensitive.The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s.
 
Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining is smooth and accurate.
 
Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation during operation.Improve the operation performance.promote using efficiency and save a large quantity of cooling water.
680 Ton High Efficiency Energy Saving Injection Molding Machine (AL-UJ/680C)


INTERNATIONAL CLASS NO 680/4680
U STYLE SPECIFICATION U/680C
Screw type Unit A B C D
Injection Unit
Screw diameter mm 90 95 100 105
Screw L/D ratio L/D 23.2 22 20.9 19.9
Shot volume(therretical) cm 3 2544 2835 3140 3461
Injection weight(PS) g 2315 2580 2858 3149
Injection rate g/s 552 612 679 748
Injection pressure M Pa 184 165 149 130
Screw speed rpm 150
Clamping unit
Clamping force KN 6800
Open stroke mm 900
Space between tie-bars(WxH) mm x mm 895x895
Max mould height mm 900
Min mould height mm 350
Ejector stroke mm 250
Ejector force KN 150
Others
Max pump pressure M Pa 16
Servo system power KW 37+37
Heating power KW  42.95
Numbers of heating area
5+1
Machine demension(LxWxH) m 10.60x2.28x2.89
Oil tank cubage L 1100
Machine weight t 30.8
Remarks:The company reserves the right to modify the specification parameters without notice.

Dairy Water Chiller

Compact chiller cooling capacity: 10kW-82kW

Characteristics: 

1. Pre-cooling

Selecting the right pre-cooling system for your farm is an important decision. There are many factors to take into consideration before deciding what type of system will suit your farm best. Cow numbers, bail number, water temperature, milk pump flow rates, power availability and primary cooling design are just some of the things that need to be considered before a solution can be proposed.

2. Chilled water system

Chilled water system chills a large volume of water to 4ËšC-10ËšC outside of milking time. It circulates the water during milking through the second stage of your plate cooler reducing milk temperature to 6ËšC-10ËšC before entering the milk vat. This dairy Water Chiller is smaller than a glycol unit but needs to run over a longer period of time each day. Chilled water system are the most common pre-cooling option.

3. Glycol system

Glycol pre-cooling system chills approved food grade glycol/water mix to around 2℃ in a 1,000L tank. The glycol water chiller continually chills glycol during milking and stores it in the storage tank this glycol then gets circulated through the second stage of your plate cooler snap chilling your milk so it enters the vat between 4℃-7℃

4. Chilled water system

• Ability to snap chill milk to 6℃-10℃ within 3 minutes of leaving the cow.

• Built in heat recovery producing hot water up to 60℃ at 3 liters per minute.

• Independent from your vat refrigeration system giving you peace of mind.

• It can use off peak power outside milking time to chill the water. 

Dairy Water ChillerDairy Chiller

Dairy Water Chiller

Dairy Water Chiller,Industrial Dairy Water Chiller,Farm Cooling Dairy Water Chiller,Milk Cooling Dairy Water Chiller

Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com