Bellows valves undergo a series of rigorous inspection and test procedures. Including 100% gas seal and no leak test test. For the bellows with vacuum requirements, the vacuum gas tightness test can be performed with a helium mass spectrometer leak detector.
Bellows valve structure features:
1. The valve body and valve cover are connected with studs with simple structure and good process performance.
2. The stem of the bellows valve not only has the stuffing box of the general valve, but also in the lower part of the stuffing box, there is a movable sealing element - stainless steel bellows in the upper part of the valve chamber, and the medium is enclosed in the valve chamber outside the valve stem. Can not enter the stuffing box, so the valve is more reliable than the general valve to prevent leakage, to ensure the seal of the valve stem and valve cover connection.
3. The stem nut uses surface nitriding to increase surface hardness and wear resistance, preventing bite phenomenon.
4. The flange bolts are made of high-strength alloy steel and have excellent high temperature creep resistance and are safe and reliable.
5. Bellows design in the valve cover cavity to avoid direct flushing with the media, improve the service life of the bellows.
6. The corrugated pipe is overlapped by 2~4 times to prevent the leakage of the valve due to the damage of the single layer of the corrugated pipe and prolong the service life of the valve.
7. Due to the long design of the bellows, the opening height is high, the main resistance of the fluid is reduced, and the flow resistance coefficient is small.
8. Double sealing with packing and bellows to achieve zero leakage.
Bellows valve structure features:
1. The valve body and valve cover are connected with studs with simple structure and good process performance.
2. The stem of the bellows valve not only has the stuffing box of the general valve, but also in the lower part of the stuffing box, there is a movable sealing element - stainless steel bellows in the upper part of the valve chamber, and the medium is enclosed in the valve chamber outside the valve stem. Can not enter the stuffing box, so the valve is more reliable than the general valve to prevent leakage, to ensure the seal of the valve stem and valve cover connection.
3. The stem nut uses surface nitriding to increase surface hardness and wear resistance, preventing bite phenomenon.
4. The flange bolts are made of high-strength alloy steel and have excellent high temperature creep resistance and are safe and reliable.
5. Bellows design in the valve cover cavity to avoid direct flushing with the media, improve the service life of the bellows.
6. The corrugated pipe is overlapped by 2~4 times to prevent the leakage of the valve due to the damage of the single layer of the corrugated pipe and prolong the service life of the valve.
7. Due to the long design of the bellows, the opening height is high, the main resistance of the fluid is reduced, and the flow resistance coefficient is small.
8. Double sealing with packing and bellows to achieve zero leakage.
EVA Traction Deck Pad is a kind of for water sport like surfboard, kite board or SUP, it can provide a strong traction for people enjoying the water sport.
EVA Traction Pad, also knows as tail pad, is to be applied on the tail of surfboard. With arch and kick tail, the surfer can control the direction and stability when surfing.
Eva Traction Deck Pad,Coaming Pads,Eva Deck Grip,Eva Traction Pads,Eva Grip Pad,Sup Deck Pad
Huizhou City Melors Plastic Products Co., Limited , https://www.melorsfloor.com