Brass Horizontal Check Control Valve for Water

   Brass Horizontal Check Valve/ Brass Swing Check Valve Specifications of Brass check valve

Brass Horizontal Check Valve/ Brass Swing Check ValveSize : DN15--100  (1/2"~4")  

 

 

1)  ISO9001 Certificate 

2)  quality guaranteed 

3)  delivery in time 
4)  over 15 years experience 

5)  Nominal pressure:1.6Mpa.

6)  Working medium:Water,non corrosive liquid(not include oil),saturated steam.

7)  Working Temperature:-20ºC≤t≤150ºC.

8)  Pressure testing to ISO5208 or as customer requirement 

9)  Pipe thread ISO 7/1, ISO228, DIN2999 , BSPT. BSP ,NPT ,G .R . ...

10)  material part :  brass body  , brass bonnet, Brass swing, brass nut .

Material:

MS58, CW617N, CuZn40Pb2, CZ132 , HOT STAMPING/ FORGING

Disc: Brass Disc silicon rubber seals or ABS disc NBR seals

Inspection:  
Each cargo will be inspected before shipping. The third-party inspection company is acceptable. Like SGS, ASIA inspection, etc.

Function :

Check Valve is an automatic valve, its main function is to prevent the media backflow, prevent pump and drive motor reverse, and discharge the container medium. Check valve can also be used in pipelines that its pressure which may rise to exceed the system pressure auxiliary supply.

 

Classification

Check valve is the valve relies on media flow to automatically open and close the disc, is used to prevent the media backflow, also known as check valve, one-way valve, reflux valve, and back pressure valve.

 

 

Welcome to your warmly inquiry!We would like to service with you!!

 Customer designs are also welcomed!!

the following is my detailed contact info .

 

Asphalt Mixing Plant

Asphalt mixing plant is one of the key equipment for road construction. It is mainly used in the production of asphalt mixture for paving road surfaces. Asphalt mixing plant consists of a number of parts, including dosing system, dryer, agitator, dust removal system, fuel system and so on.

The batching system is one of the core parts of Asphalt mixing plant. It is responsible for adding various raw materials to the blender in a certain proportion. These raw materials include asphalt, sand, gravel and other additives. The batching system usually consists of a weighing sensor, a batching bucket and a batching transfer device.

The dryer is another important part of the Asphalt mixing plant. It is mainly used for drying raw materials such as sand and stones. There are heating elements and rotating agitators inside the dryer, which can make the raw materials fully heated and mixed evenly.

Mixer is one of the core parts of Asphalt mixing station. It is responsible for mixing various raw materials together to produce a high quality asphalt mixture. The agitator usually consists of multiple mixing blades, which can fully mix the raw materials to ensure the stable quality of the asphalt mixture produced.

Dust removal system is one of the important components of Asphalt mixing plant. It is mainly used to collect dust and exhaust gases generated during the production process. The dust removal system is usually composed of multiple filters, which can effectively filter out dust and exhaust gas to ensure a clean working environment and air quality.

Fuel system is one of the key parts of Asphalt mixing plant. It is responsible for providing the fuel to power the Asphalt mixing plant. The fuel system usually consists of a fuel pump, a fuel filter and a fuel injector.

Asphalt mixing plant is a kind of high efficiency asphalt mixture production equipment, widely used in road construction field. It has the advantages of high automation, high production efficiency, stable product quality and so on, and provides a strong support and guarantee for road construction.

Asphalt Mixing Plant,Mixer Plant,Asphalt Mixing Bitumen Equipment,Asphalt Paving Equipment

BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockplant.com