threaded flange
Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.
Blind Flanges
The blind flange is a blank disc with bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
Slip on flangesÂ
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application. This type of flange is available in large size also to connect big bore piping with storage tank nozzles. Normally, these flanges are of forged construction and are provided with the hub. Sometimes, these flanges are fabricated from plates and are not provided with the hub.
Weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.
Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.
Flange Standard
| American Standard | ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207 |
| Japanese Standard | JIS / KS 5K / 10K / 16K / 20K / 30K |
| German Standard | DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029 |
| British Standard | BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D |
| Italian Standard | UNI 2253,2254,2276,2278,2281,6084-6093 |
| China Standard | GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028 |
Production Process
Equipment Exhibition
Product Show
Â
Quality Assurance
Quality System Certificate:
We have Grade A Manufacture License of Special Equipment , Press Equipment Directive Quality-Assurance System Certificate , China Classification Society Certificate of Work Approval, TUV Certificate
Perfect Inspection Process:
Raw material inspection(5steps)- Raw materials testing is to ensure the raw material conforming to the order requirements.
Process testing(10steps)-Each processing step testing is to guarantee each step product qualified.
Factory testing(6steps)-Assure 100% product qualified rate to meet customer's requirements
Contact Us
Â
Sales network
Â
threaded flange
Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.
Blind Flanges
The blind flange is a blank disc with bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
Slip on flangesÂ
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application. This type of flange is available in large size also to connect big bore piping with storage tank nozzles. Normally, these flanges are of forged construction and are provided with the hub. Sometimes, these flanges are fabricated from plates and are not provided with the hub.
Weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.
Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.
Flange Standard
| American Standard | ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207 |
| Japanese Standard | JIS / KS 5K / 10K / 16K / 20K / 30K |
| German Standard | DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029 |
| British Standard | BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D |
| Italian Standard | UNI 2253,2254,2276,2278,2281,6084-6093 |
| China Standard | GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028 |
Production Process
Equipment Exhibition
Product Show
Â
Quality Assurance
Quality System Certificate:
We have Grade A Manufacture License of Special Equipment , Press Equipment Directive Quality-Assurance System Certificate , China Classification Society Certificate of Work Approval, TUV Certificate
Perfect Inspection Process:
Raw material inspection(5steps)- Raw materials testing is to ensure the raw material conforming to the order requirements.
Process testing(10steps)-Each processing step testing is to guarantee each step product qualified.
Factory testing(6steps)-Assure 100% product qualified rate to meet customer's requirements
Contact Us
Â
Sales network
Â
Vacuum-formed plastic is used to produce a variety of custom design parts.Vacuum forming become to be a popular and cost-effective solution for a wide range of plastic forming needs.
The product's application must be taken into consideration while selecting the material. Normal vacuum forming plastic included:Polyester, HDPE, LDPE, PVC,PETG,polypropylene, polystyrene, ABS, acrylics, polycarbonate, ASA as well as other ABS capped acrylic and ABS capped polycarbonate.
ABS plastic also named Acrylonitrile Butadiene Styrene,is the most widely used in vacuum forming and available in a range of textured, smooth and embossed finishes, offered in virgin, recycled,UV resistant and flame retardant grades(UL94-V0). As good impact resistance ABS usually is vacuum formed for vehicle,equipment,plastic tray and so on industrial.
HIPS plastic also named High Impact Polystyrene ,is most used in Point of Sale (POS), display and signage market due to its visual appearance (colour options, gloss level, texture), the ease with which it can be processed along with its antistatic and electrical conductivity.
HDPE plastic also named High-Density Polyethylene,is widely used in indoor and outdoor applications including bottles, playground equipment packaging and furniture. It is a plastic with high tensile strength, and good chemical and corrosion resistance.And it has properties of recycling,UV stabilised, improved impact resistance.
PP Plastic also named Polypropylene,is similar to PE. But PE is more harder more heat resistant.But PP is more durable.Mostly plastic tray is produced by PP plastic.
PMMA plastic also named acrylic or glass fiber.It has properties of tensile strength, transparency, polishability and UV tolerance but less impact strength.It is available in clear, antiglare, opal, white, and frosted.It is best choice for windows, displays or see-through enclosures.
PETG named Polyethylene Terephthalate Glycol is another clear rigid plastic sheet.PETG is easily vacuum formed, printed, bonded and polished. As its' excellent clarity and impact resistance, it is widely used in outdoor application.
PC named polycarbonate, has combined advantage of PMMA and ABS. Usually is transparency and semi- transparency. It is expensive but that is best choice for clear plastic vacuum forming.
ASA is one new material which has all good properties of ABS. But much good UV resistant for outdoor usage. It usually be used for radome,air conditioning housing etc outdoor products.
Meanwhile, ABS capped acylic combined the good properties of ABS and acylic. ABS capped polycarbonate combined the good properties of ABS and polycarbonate.If you need high glossy surface for your design,then this is your only choice.
Vacuum Forming Plastic,ABS Vacuum Forming,Polypropylene Vacuum Forming,HDPE Vacuum Forming,Polystyrene Vacuum Forming
Dongguan Yiyongli Industrial Co.,Ltd. , https://www.dgthermoforming.com