1. Brief introduction of function
  CB-BNS ceramic stainless steel gear pump is a new type of chemical pump developed on the basis of CB-B gear pump.
2. Structural characteristics:
   CB-BNS pump uses stainless steel for the body, high quality alloy steel for the heart (gear), the transmission of SF-1 type composite bearings, the upper and bottom of the inner wall inlay ceramic, reduce the wear of shaft contact end axial oil seal use bone pipe rack and high temperature rubber oil seal.
3. The characteristics of the pump:
   3.1 Small volume, light weight, simple structure, low price and reliable work.
   3.2 Good self-priming performance, no oil is needed when the machine is opened, and the first use does not need to be filled with oil.
   3.3 Easy to install, use and maintain.
The product has the advantages of acid and alkali resistance, abrasion resistance, high temperature resistance, long life and beautiful appearance. It is widely applied to pharmaceutical, food, chemical industry, foundry machinery and so on. It is well received by special consumers.
4. Application
Medium: sodium silicate and potassium water glass (commonly known as runner alkali and polysilicate aqueous solution).
Scope of application:
Pumping, printing ink, kerosene, high temperature, acid and alkali resistance can also be used as boiler oil pumps for ceramic and glass industries.
Â
| MODEL | CAPACITY | REVOLUTION | PRESSURE | SUCTION HEIGHT |
| L/min | r/min | MPa | mm | |
| CB-BNS40 | 40 | 1450 | 2.5 | 300 |
6. Stock List:
| MODEL | QTY |
| CB-BNS1 | 160 |
| CB-BNS2.5 | 205 |
| CB-BNS4 | 196 |
| CB-BNS6 | 190 |
| CB-BNS10 | 201 |
| CB-BNS16 | 183 |
| CB-BNS20 | 167 |
| CB-BNS25 | 184 |
| CB-BNS32 | 170 |
| CB-BNS40 | 185 |
| CB-BNS50 | 189 |
| CB-BNS63 | 188 |
| CB-BNS80 | 184 |
| CB-BNS100 | 193 |
| CB-BNS125 | 184 |
| CB-BNS160 | 181 |
Â
7. About our Products:
WENZHOU SOLID MECHANICAL EQUIPMENT CO., LTD
The general logistics automatic Sorting System workflow is mainly divided into confluence → sorting signal input → sorting and diversion → sorting.
1. Confluence: The materials picked from different positions according to the picking instruction are sent to the pre-processing equipment in a certain way, and collected by the pre-processing equipment to the main conveyor line. This process is called confluence.
2. Sorting: The signal input reaches the material on the main conveyor line, and the basic information of the material is read through an automatic identification device (such as a barcode scanner, etc.), and the computer handles the read material information accordingly. This process is called Input for sorting signal.
3. Diversion: After the material information is read into the computer system, it continues to move on the main conveying line. The storage rack sorting system detects the moving position of the material in real time. When the material reaches the corresponding sorting crossing, the control system sends a sorting mechanism to the sorting mechanism. After picking up the order, the sorting mechanism immediately produces corresponding actions to make the material enter the corresponding sorting gate, this process is called diversion.
4. Sorting: The materials entering the sorting crossing finally reach the terminal of the sorting system, and are sorted and transported to the corresponding area by manual or mechanical handling tools.
The essence of retail in the future will remain cost, efficiency and experience at the center. The sorting capacity of some sorting centers can reach 9,000 pieces per hour. Under the premise of the same site size and sorting volume, it is estimated that each site can save 180 manpower.
Sorting System,Sortation Conveyor,Conveyor Sorting Systems,Conveyor Line Sorting System
DMT Machineries (Suzhou) Ltd , https://www.dmtsz.com