Coil Shear Cut to Length Machine for Steel Coil

Steel coil cross shear cut to length line machine for uncoiling leveling shearing stacking
Thin plate cut to length line (0.2-4.0mm)

1.  Used for metal plate coil uncoiling, leveling, set length, cutting the set size and stacking. This line used for processing cold rolled and hot rolled carbon steel, silicon steel, tinplate, stainless steel and other different kinds of surface plating metal.

 2.   Cut to length line is mainly composed of entry coil car, uncoiler, leveler, looping bridge, side guide, servo feeding device, shearing machine, transfer table, stacking device, etc. This line can configure trimming device.
 
 3.   This production line Hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller and Taiwan WEINVIEW touch screen to control all functions, main motor of leveler adopts AC Broadband motor, Inverter adopts Omron, which has high degree of automation, high shearing precision,stable and reliable performance, Easy operation and maintenance, etc

Parameters
  

Thick plate cut to length line (4-22mm)

1.  Cut to lenth line is used to cut hot-rolled steel coil, stainless steel coil, aluminum coil, cut into various specifications of the size, this line also can have trimming function, make the width size meet customer requirements

2.This cut to length line is composed of entry coil car, uncoiler, material-feeding device, simple leveler,  transfer bridge, trimming shearer(optional), leveler, setting length device, plate feeder, cutting device, transfer table, thrower stacking device, Hydraulic system and electric control system

3.    This production line hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller and Taiwan WEINVIEW touch screen to control all functions, main motor of leveler adopts high power DC motor, DC controller adopts ETD products, which has high degree of automation, high shearing precision, stable and reliable performance, easy operation and maintenance, etc

 Parameters
  
Machine video link 

https://www.facebook.com/photo.php?v=1681723778734755

Certification



Service

Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
 
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.
 

Aluminum Casting Parts

Aluminum alloy parts are widely used in many industries. There are many processing methods for aluminum alloy products, such as CNC machining, extrusion molding, die casting, gravity casting, forging, sand casting and so on. Each of these processing methods has its own advantages and characteristics, and some are also determined according to the structure of the product. Aluminum investment casting can reduce mold development time and cost. Precision castings with complex structures can also be easily realized with short mold development time. And it is suitable for small batch and large batch production.

SCZY is very professional in the production of metal products, especially in investment casting and precision CNC machining. We can analyze the product structure and other aspects, and can make suggestions for improvement or optimization of the unreasonable aspects of the product structure to ensure the stability of subsequent mass production. Our in-house precision CNC machining can ensure the accuracy requirements of the product, and the accuracy can reach ±0.01mm under normal conditions. We are more than happy to solve all problems.

Aluminum Casting Parts, Gravity Casting Aluminum,Aluminum Alloy Investment Castings,Aluminum Die Casting Mold,Aluminum alloy castings

Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com