Â
| Technical parameters: |
 |
||
|
 | |||
| 1 | Name of commodity & specification | deck floor forming machine |
 |
| 2 | Main motor power | 22kw, 3 phase |
 |
| 3 | Hydraulic motor power | 4kw |
 |
| 4 | Hydraulic Pressure | 10-12MPa |
 |
| 5 | Voltage | 380V /3phase/ 50 HZ (or as your requirement) |
 |
| 6 | Control System | PLC Delta Inverter |
 |
| 7 | Main Frame | 300mm H-Beam or 350mm |
 |
| 8 | Backboard Thickness | 14mm |
 |
| 9 | Chain Size | 20mm |
 |
| 10 | Feeding Material | color steel coils |
 |
| 11 | Feeding Thickness | 1.2mm | 2 |
| 12 | Feeding Width | 1220mm |
 |
| 13 | Effective width | 1000mm |
 |
| 14 | Productivity | 0-2m/min |
 |
| 15 | Roll Station | 28roll steps(according to different design) |
 |
| 16 | Roller Diameter | 90mm(depend on different design) |
 |
| 17 | Roller material | 45# steel |
 |
| 18 | Cutter material | Cr12 , quenched |
 |
| 19 | Cr-Plating Size | 0.05mm |
 |
| 20 | Overall Size | 10500×1200×1500mm |
 |
| 21 | Total Weight | 10.0T |
 |
| 22 | Components | Manual Uncoiler-------------------1 set |
 |
| Guiding Platform------------------1 set |
 |
||
| Coil Strip Leveler------------------1 set |
 |
||
| Main Machine of Roll Forming------1 set |
 |
||
| Electric-Motor---------------------1 set |
 |
||
| Cutting Device--------------------1 set |
 |
||
| Hydraulic Station------------------1 set |
 |
||
| PLC Control-----------------------1 set |
 |
||
| Supporter Table-------------------1 set |
 |
||
| 23 | Workflow | Manual decoiling----feeding and guiding----roll forming----cut to length----run out table |
 |
|
 | |||
| 24 | Package | nude in the container |
 |
| 25 | Minimum order quantity | 1 set |
 |
| 26 | Payment terms | T/T(30% T/T pay in advance, the remaining 70% pay before ship) |
 |
|
 | |||
| 27 | Delivery time | 30Â working days later after receiving the deposit |
 |
| All technical parameters can be changed, according to user's need. |
 |
||
contact person:shirlyzhang
Mobilephone number:0086+18331794415
 Strong High strength Deck Floor Forming Machine
Â
| Technical parameters: |
 |
||
|
 | |||
| 1 | Name of commodity & specification | deck floor forming machine |
 |
| 2 | Main motor power | 22kw, 3 phase |
 |
| 3 | Hydraulic motor power | 4kw |
 |
| 4 | Hydraulic Pressure | 10-12MPa |
 |
| 5 | Voltage | 380V /3phase/ 50 HZ (or as your requirement) |
 |
| 6 | Control System | PLC Delta Inverter |
 |
| 7 | Main Frame | 300mm H-Beam or 350mm |
 |
| 8 | Backboard Thickness | 14mm |
 |
| 9 | Chain Size | 20mm |
 |
| 10 | Feeding Material | color steel coils |
 |
| 11 | Feeding Thickness | 1.2mm | 2 |
| 12 | Feeding Width | 1220mm |
 |
| 13 | Effective width | 1000mm |
 |
| 14 | Productivity | 0-2m/min |
 |
| 15 | Roll Station | 28roll steps(according to different design) |
 |
| 16 | Roller Diameter | 90mm(depend on different design) |
 |
| 17 | Roller material | 45# steel |
 |
| 18 | Cutter material | Cr12 , quenched |
 |
| 19 | Cr-Plating Size | 0.05mm |
 |
| 20 | Overall Size | 10500×1200×1500mm |
 |
| 21 | Total Weight | 10.0T |
 |
| 22 | Components | Manual Uncoiler-------------------1 set |
 |
| Guiding Platform------------------1 set |
 |
||
| Coil Strip Leveler------------------1 set |
 |
||
| Main Machine of Roll Forming------1 set |
 |
||
| Electric-Motor---------------------1 set |
 |
||
| Cutting Device--------------------1 set |
 |
||
| Hydraulic Station------------------1 set |
 |
||
| PLC Control-----------------------1 set |
 |
||
| Supporter Table-------------------1 set |
 |
||
| 23 | Workflow | Manual decoiling----feeding and guiding----roll forming----cut to length----run out table |
 |
|
 | |||
| 24 | Package | nude in the container |
 |
| 25 | Minimum order quantity | 1 set |
 |
| 26 | Payment terms | T/T(30% T/T pay in advance, the remaining 70% pay before ship) |
 |
|
 | |||
| 27 | Delivery time | 30Â working days later after receiving the deposit |
 |
| All technical parameters can be changed, according to user's need. |
 |
||
contact person:shirlyzhang
Mobilephone number:0086+18331794415
Â
Size: 1/2''~6''
Class Rating: 3000~6000
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
SALES@GHSAILINGPIPE.COM
Socket pipe fittings include three types of connection: socket welding connection (SW), butt welding joint (BW), threaded connection (TR). The standard socket pipe fittings ASME B16.11, HG/T 21634-1996, MSS SP-83, MSS SP -79, MSS SP-97, MSS SP-95, 14383-2008, concave, decorative, etc., socket welded pipe parts include stainless steel, alloy steel and carbon steel.
Socket Weld Fittings,Forged Socket Elbow,Socket Welding Elbow,ASTM A105 Socket Elbow
He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com