Dongfeng Tianlong Top Four Back Eight Powder Material Transporter
Chassis configuration: D310 flat high top double cab, Dongfeng Cummins L315 30 engine (EGR), wheelbase 1950+4500+1300(mm), resistance heating cold starter, fuel tank lock (three locks in one), mechanical Accelerator pedals and switches, Φ430 (mm) push-type diaphragm spring clutch, Shanbei Gear 9-speed 9JS119T-B gearbox, 5T double-front axle, 10T single-speed deceleration double rear axle (Dongfeng 435), frame cross-section size 300 ×90×[8+6](mm), 11.00R20 radial tire, manual adjustment arm, full floating front and rear suspension mechanical suspension cab suspension, hydraulic electric flip, colorless front windshield, manual sheet metal sunroof , Electric glass lifter, Central control door lock, Airbag shock-absorbing driver's seat, Channel type instrument panel, Air conditioner.
Modified configuration: The powder material transport vehicle uses the vehicle's power to drive the air compressor, and the compressed air is sent into the air chamber in the lower part of the sealed tank through the pipeline, so that the powder particles in the liquid bed of the air chamber are suspended into a fluid state when the tank is When the internal pressure reaches the rated value, the discharge valve is opened, and the fluidized material is conveyed through the pipe for transportation.
The powder material transporter tank is mainly composed of a cylinder body, a tank upper feed inlet, a fluidized bed, a discharge pipe assembly, an air intake pipe and other accessories. A gas inlet pipe is provided for each of the front and rear air chambers, and the functions of simultaneous opening and individual control can be realized respectively through the ball valve.
The tank volume is about 40 cubic meters, Qingdao 10m3 air compressor, divided into three positions.
The tank body is made of wuhan's genuine high-quality 5mm carbon steel plate. The steel plate weld seam is welded by numerical control automatic welding machine. The deformation is small, the precision and strength are high, and the welding seam strength is not lower than that of the parent material itself. The weld surface is smooth, smooth and beautiful. The threshold is detected by ultrasonic welds. The barrel adopts a 9.6-meter large-scale coiler to form one time, with higher strength, safer and more durable. After the can body is molded, the high-pressure gas leak test can make the can body have the characteristics of high strength, stable center of gravity, and smooth and safe vehicle transportation.
For more vehicle information please visit the company's official website: or call the sales number 13886889444
Dongfeng Tianlong Top Four Back Eight Powder Material Transporter | |||
Vehicle name | CSC5314GFLD Powder Material Transporter | Chassis model | DFL1311A4 |
Overall size ( length / width / height ) | 11990 × 2500 × 3960 | Cargo bed ( length / width / height ) |  ×  ×  |
Total mass (Kg) | 31000 | Load quality utilization factor | 13900,13965 |
Service quality (kg) | 16905 | Rated load mass (kg) | 3,2 |
engine model | dCi340-30 ISLe340 30 dCi375-30 L315 30 L340 30 | Engine manufacturer | Dongfeng Motor Corporation Ltd Dongfeng Cummins Engine Co., Ltd. Dongfeng Motor Corporation Ltd Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. |
engine capacity | 11120 8900 11120 8900 8900 | Engine power | 250 250 276 231 250 |
According to the standard | GB3847-2005, GB17691-2005 State III GB3847-2005, GB17691-2005 State III | ||
Approach / departure angle | 20/11 | Front suspension/rear suspension | 1460/3030,1460/2980 |
Wheelbase (mm) | 1950+4500+1300, 1950+4500+1350, | Axle load | 6500/6500/18000 (with two axes installed) |
Number of axes | 4 | Number of springs | 8/8/10, 3/3/4, 9/9/10, 9/9/13 |
Number of tires | 12 | Tire specifications | 10.00-20,10.00R20,11.00-20,11.00R20,295/80R22.5 |
Front track | 1940/1940, 2027/2027 | Rear track | 1860/1860 |
Steering Type | steering wheel | Maximum speed | 90 |
Vehicle remarks | The effective volume of the tank : 32.4 cubic meters, the tank dimensions (mm): straight section length 8580, maximum diameter of 2450. Transport medium: powdered graphite, density: 450 kg/m3. When the number of passengers in the cab is 3, the loading quality is 13900kg; the wheelbase (mm) 1950+4250+1300 corresponds to the front suspension/rear suspension (mm) 1460/3030; the cab is optional with the chassis. Side protection is symmetrical with cold-formed channel steel / Q235-A, threaded connection. After the protection of cold bend channel steel / Q235-A, welded connection. The height of the rear protective section is 100mm, the width of the section is 50mm, and the height of the lower edge is 510mm. | ||
For more information and pictures please contact our company, we will provide you with the best service. | |||
China leading manufacturers and suppliers of Rtv Silicone,Rtv Silicone Rubber, and we are specialize in Rtv Sealant,Black Rtv Sealant, etc.
Rtv Silicone,Rtv Silicone Rubber,Rtv Sealant,Black Rtv Sealant
KRONYO United Co., Ltd. , https://www.kronyoglue.com