Parameter of machine:
(1) Processing material: Aluzinc/galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 840mm
(4) Feeding width: 1000mm
(5) Main motor power: 3 kw
(6) Forming steps: 3 steps
(7) Control systerm: PLC computer control with inverter
(8) Power supply: 380V, 3 Phase, 60Hz
(9) 0veral sized: 3000mm*1300mm*1300mm
Payment term
TT, you should pay 30% as the deposit on the order day, then pay 70% before delivery when you inspect goods well in factory or by video
Warranty
24 months, and lifelong technical support service
Installation
If you need, we will send one technician to your factory to install & testing the machine. You should assist the technician to get Visa and pay for flight tickets and local accommodation, and pay 80 USD/day for salary.
| No. | Name | Unit | Qty |
| 1 | Manual decoiler | set | 1 |
| 2 | Main forming machine | set | 1 |
| 3 | PLC control system | set | 1 |
| 4 | Hydraulic pump station | set | 1 |
| 5 | Curving part | set | 1 |
| 6 | Electric motor | set | 1 |
Packing:
1. One 20feet container for loading one set machine with mechanical decoiler.Â
2. Main machine body and decoiler is load naked (tighten to container with steel wire rope).Â
3. Spare parts and operating tools are loading in tooling box.
Â
Delivery: about 30 days.
Â
Where is your factory located ? How can I visit you ?
Dixin Roll forming machinery is located at Industrial Zone of Botou , Hebei Province of China. Welcome to visit us by:
Â
1.Fly to BEIJING or TIANJIN Airport, then take high speed train from BEIJING NAN to CANGZHOU XI, about 1 hour, I will pick up you there.
2.Fly to SHANGHAI Airport, then take high speed train from SHANGHAI HONGQIAO to CANGZHOUXI, about 4.5 hour,I will pick up you there.
Trapezoidal Sheet Roll Forming Machine
A trapezoidal sheet roll forming machine is a regular metal sheet roll former that produces metal roofing sheets or roof panels for both individual and industrial building.
Trapezoidal roofing sheets are the most popular metal roof panels not only for residential buildings but also for commercial or industrial buildings. There are so many different profiles for a variety of applications. People like to use low-profile trapezoidal sheets for elevation and IDT roofing, while for wide-span roofing and load-bearing structures, they tend to select high-profile trapezoidal sheets. In addition, trapezoidal sheets have other names in Africa as industrial trough IT4, IT5, IT6 roof profiles, therefore people can barely find two exactly the same trapezoidal sheet roll forming machine in the markets.
Brief introduction of Trapezoidal Roof Sheet Roll Forming Machine:
TR750 Trapezoidal Sheet Roll Forming Machine
This trapezoidal sheet roll forming machine produces trapezoidal sheets from colour ppgi, gi, aluzinc sheets, and sometimes aluminium steel coils (aluminum roof panels are prefered in Nigeria). Generally, material thickness varies from 0.3 to 0.8mm, and width varies from 914mm to 1250mm. However, in some applications, material thickness can reach up to 1.5mm, like roof deck. Furthermore, in some countries or areas, people use G550 material to make full hard metal roofing sheets.
Sometimes when a client needs to produce trapezoidal sheets with different effective widths with anything else remained the same. In this case, the investment shall be made on only one machine, because a trapezoidal roof panel roll forming machine is always adjustable for different feeding widths. This means you can make trapezoidal roof panels with different effective widths from different-width materials. However, a client must need two trapezoidal sheet roll forming machines for manufacturing two panels at the same time.
Just like the regular roof sheet roll former, a trapezoidal sheet roll forming machine typically consists the components as following:
- Manual Decoiler
- Entry/feeding Guide
- Roll Forming Unit
- Hydraulic Unit
- Cutting Unit
- Control system
- Runout Tables
Technical Parameters of Trapezoidal Sheet Roll Forming Machine:
- Uncoiler: Manual Uncoiler (a Hydraulic decoiler is optional);
- Inner diameter : 480-520mm;
- Outer diameter: 1250mm;
- Loading weight: 5TONS;
- Material width: 914-1250mm;
- Material thickness: 0.3-0.8mm (sometimes upto 1.5mm maximum, depends on techncial requirements);
- Forming speed: 0-12m/min (high speed is optional as per request);
- Forming stations: 16-22 forming stations (subject to the technical drawing of profiles)
- Roll forming stands structure: conjoint type
- Material of Roller: high quality 45#steel with the surface mirro polishing and coated with hard chrome 0.05mm.
- Material of Shafts:45# high-quality steel;
- Diameter of Shafts: 70mm (80-90mm if the thickness over 1mm);
- Thickness of Siding Plate: 18mm;
- Transmission: by chain-brackets;
-
Motor Power: 5.5 KW
- G550 Full Hard Trapezoidal Roofing Sheet Roll Forming Machine with safety guard equiped
- Material of cutting blade:Cr12 with quenched treatment 60-62 degrees;
- Hydraulic Power: 4KW;
- Cutting Lengths and Quantities: Customer can set required lengths and quantites clients through the touch screen on PLC control box.
- Cutting tolerance: +/-2mm
- Control system: Panasonic PLC, Inverter, CHNT transformer and HMI
- Voltage: 380V/50HZ/3phase
There are different names for trapezoidal sheet roll forming machines in some regions or areas! For example, in Africa, people like to metra roll forming machine, and sometime they give the name industrial trough IT4, IT5, IT6 roof sheet roll forming machineetc.
MAXON designs and builds customized trapezoidal sheet roll forming machines. For instance, some customers ask for G550 metal roofing sheet roll forming machine, some customers may prefer a separate forming stands structure trapezoidal sheet roll forming machine, or some customers may need safety guard on the roll forming machine body etc.
Trapezoidal Sheet Roll Forming Machine,Trapezoidal Joint Type,Tile Making Machine,Metal Sheet Roll Forming Machine
Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com