Fan Coil 3 Way Brass Valves with Motor Actuator

Introduction
SKC Series Electric Three-Way Valve is applied to on-off control for HVAC water system,  composed of driver and valve body. The valve body is casted with excellent brass and the driver is made of flame-retardant engineering plastic, with limit switch inside and manual valve opening mechanism, is easy to debug and test pressure. In which, B type driver has built-in relay, could realize one-line control and multi-valve parallel, match with various temperature control switches.
Character of structur
1.Inlay contact switch, the motor is power off after the valve completes open and close, so it has long service life and power saving, but is also safe.
2.The valve body is separated with driver, could be disassembled rapidly.
3.The valve body structure is unique, is allowed of big pressure difference.
4.The driver has manual controller is available for system debugging and maintenance, the manual opening is about 70% (push down the white driving arm to the bottom, and then push inside, when the power is recovered, the valve and driver will return to automatic position)
5.B type driver has inlay relay, one-line control and three-speed switch, realize multi valves parallel, and match with various temperature control switches. (special for four-pipe)
6.Select ordinary driver, one temperature controller matches only one electric vale, or any results caused will be nothing with manufacturer.

Points for installation:
1.Please read this instruction carefully before installation, ask professional to perform installation and connect according to wiring diagram.
2.The electric valve should be installed to the place with certain distance from around articles, but also could be reached by maintenance person. No electric equipments are allowed to install under the valve body, as to avoid leakage and danger. The driver shall be above the valve body horizontally.
3.Clear up the sundries in the pipe before installation, install 50 mu (or thinner) filter in the front end of electric valve.

Technical data
 
Installation diagram

Appearance, section and main dimension


  Introduction
SKC Series Electric Three-Way Valve is applied to on-off control for HVAC water system,  composed of driver and valve body. The valve body is casted with excellent brass and the driver is made of flame-retardant engineering plastic, with limit switch inside and manual valve opening mechanism, is easy to debug and test pressure. In which, B type driver has built-in relay, could realize one-line control and multi-valve parallel, match with various temperature control switches.
Character of structur
1.Inlay contact switch, the motor is power off after the valve completes open and close, so it has long service life and power saving, but is also safe.
2.The valve body is separated with driver, could be disassembled rapidly.
3.The valve body structure is unique, is allowed of big pressure difference.
4.The driver has manual controller is available for system debugging and maintenance, the manual opening is about 70% (push down the white driving arm to the bottom, and then push inside, when the power is recovered, the valve and driver will return to automatic position)
5.B type driver has inlay relay, one-line control and three-speed switch, realize multi valves parallel, and match with various temperature control switches. (special for four-pipe)
6.Select ordinary driver, one temperature controller matches only one electric vale, or any results caused will be nothing with manufacturer.

Points for installation:
1.Please read this instruction carefully before installation, ask professional to perform installation and connect according to wiring diagram.
2.The electric valve should be installed to the place with certain distance from around articles, but also could be reached by maintenance person. No electric equipments are allowed to install under the valve body, as to avoid leakage and danger. The driver shall be above the valve body horizontally.
3.Clear up the sundries in the pipe before installation, install 50 mu (or thinner) filter in the front end of electric valve.

Technical data
 
Installation diagram

Appearance, section and main dimension


 

Cement Grinding Aids

Cement grinding aid is a kind of chemical additives can improve cement grinding effect and performance, can significantly improve the cement production, every period cement strength, were to improve its liquidity.Cement grinding aid can greatly reduce the grinding ball phenomenon formed in the process of electrostatic adsorption package, and can reduce the grinding of ultrafine particles in the process of coalescence trend again.Cement grinding aid can significantly improve the liquidity of cement and improve the mill grinding effect and efficiency of classifier choose powder, so as to reduce the energy consumption of grinding.Using grinding agent in the production of cement with a low compaction trend of coalescence, which benefits the loading and unloading of cement, and can reduce the phenomenon of wall hanging cement silo.As a kind of chemical additives, grinding agent can improve the cement particle distribution and hydration, so as to improve the early strength cement and later strength.

Cement Grinding Aids,Grinding Aid,Grinding Aid For Cement Mill,Grinding Aid For Cement Production

NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.luckychemical.com