KINKAI third generation heat pump dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator, circulating hot-air assures uniform drying and high efficiency.
Â
Model: Â JK03RD, JK06RD, JK12RD
Power Supply:Â Â 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp:  75ºC
Working Temp:  -10~45ºC
Functions:Â Â Heating / Cooling / Dehumidify
Dryer Type:Â Batch Type
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final vegetables/fruits/seafood/herbs will be dried by the hot air circulating in drying chamber
Features Of KINKAI Vegetable Drying Machine:
1. Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2. PLC + Touch Screen, operating easily; can setting different drying curve, Suitable for drying different materials.
3. Second waste heat recovery technology (patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, the heat efficiency is high and energy is saved.
4. By using the forced ventilation function, there are the adjustable air distribution plates inside the oven. The materials can be dried uniformly.
5. The temperature: hot air heating 10-75°C, max 75°C.
6.  The baking plate dimensions and materials can customize as customer request.
7. During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good dehydration, keep nutrient content;
8. Safe and reliable operation, automatic intelligent control, 24-hour continuous drying.
Technical Parameters
| Double Dryers + Drying Chamber | ||||
| Model | Unit | JK03RD (x2) | JK06RD (x2) | JK12RD (x2) |
| Power Input | KW | 9.6 | 17 | 30 |
| Power Supply | V/PH/HZ | 380V/3PH, 50/60HZ | 380V/3PH, 50/60HZ | |
| 220V/1PH, 50/60HZ | ||||
| Rated Current | A | 19.2A(380V), 44A(220V) | 34 | 60 |
| Heating Capacity | KW | 21 | 42 | 84 |
| Cooling Capacity | KW | 15.6 | 36 | 64 |
| Dehumidify | L/H | 24 | 50 | 100 |
| Max. Temperature | ºC | ≤75 | ≤75 | ≤75 |
| Working Condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric Shock Protection Grade | I | I | I | |
| Max. Exhause Pressure | Mpa | 3 | 3 | 3 |
| Noise | dB(A) | ≤75 | ≤75 | ≤75 |
| Power Consumption/ H | KWH | 9.6 | 17 | 30 |
| Electric Heater | KW | 6 | 12 | 24 |
| Blowing Type | / | Horizontal Blowing 360ºC | ||
| Dimension Of Dryer | MM | 1675x860x1280 | 1760x1060x1280 | 2120x1360x1590 |
| Weight | KG | 295x2 | 385x2 | 540x2 |
Recommend Dryer+Drying Chamber Sizes
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK12RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 800Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK12RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Â
Hoisting Mechanism And Spare Parts
The hoisting mechanism for a Tower Crane typically consists of a combination of a motor, a gearbox, wire ropes, and a hook block. Here is a breakdown of its components and how they work together:
1. Motor: The hoisting motor provides the power needed to lift and lower loads. It is usually an electric motor that generates high torque to handle heavy loads.
2. Gearbox: The motor's rotational motion is transmitted to the hoisting drum through a gearbox. The gearbox helps increase the torque and reduce the speed of the motor, enabling the crane to lift heavy loads at a controlled speed.
3. Hoisting Drum: The hoisting drum is a cylindrical drum around which the wire ropes are wound. It is directly connected to the gearbox and rotates as the motor operates. The drum's size and design determine the amount of Wire Rope it can hold.
4. Wire Ropes:
The wire ropes are wound around the hoisting drum and connected to the hook block. These ropes are made of high-strength steel and have a high load-bearing capacity. Multiple wire ropes are used to distribute the load evenly and ensure stability during lifting operations.
5. Hook Block: The hook block is attached to the lower end of the wire ropes and is responsible for carrying the load. It consists of a pulley system with one or more sheaves, which allows the wire ropes to change direction and support the load securely.
During operation, the motor drives the hoisting drum through the gearbox. As the drum rotates, the wire ropes are wound or unwound, depending on the direction of rotation. This movement raises or lowers the hook block, allowing the crane to lift or lower loads.
The hoisting mechanism is controlled by the crane operator using various controls and switches. Safety features such as limit switches and overload protection systems are also incorporated to prevent accidents and ensure safe lifting operations.
Hoisting Mechanism,Tower Crane Lift Motor,Tower Crane Axial Fans,Tower Crane Hoist Motor, Tower Crane Hoisting Reducer
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com