Intelligent Electromagnetic Flowmeter for Conductive Liquids

Posted on

  • Model NO.: SE11
  • Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Corrosive Liquid/Gas
  • Sensor: Tube/Flange
  • Type: Electromagnetic Flow Meter
  • Measuring Principle: Electrical Principles
  • Certification: JIS, DIN, GB, CE, ISO
  • Trademark: SINIER
  • Specification: 4-20mA/ Hart/ Modbus/ Profibus
  • Accuracy: ±0.2-0.5%
  • Size: DN50-100
  • Application: Industrial Production
  • Measuring Media: Liquid
  • Measurement Object: Closed Pipeline
  • Pressure: 0.6/1.0/1.6/2.5/4.0MPa
  • Transport Package: Wooden Cases
  • Origin: China
Intelligent Electromagnetic Flowmeter for Conductive Liquids
---Your Leading Process Control and Measuring Instrumentations Supplier in China
Specifications: 
Conductive Liquid Measuring Electromagnetic flowmeters
1. High accuracy
2. Long life time
3. Super quality
4. Competitive Price

Wide application: 
Chemical, power supply, 
Metallurgical mine, oil, 
Water supply and drainage, paper making, 
Pharmaceutical, food and beverage, etc. 

Feature: 
1. No pressure loss. No moving parts. 
2. High accuracy of 0.2%. 
3. Wide size range of 10~2000mm, adapt to different size of pipeline. 
4. Two-line LCD, able to display positive and negative current flow and total flow. 
5. Measurement is not affected by the density, viscosity, temperature, pressure and electro conductibility of fluid; 
6. Multiple choices are available for the liner of converter and the material of electrode; 
7. Pulse and 4-20mA standard current output. Multiple choices of communications: RS232, RS485, HART, Modbus, Profibus, etc. 
8. Explosion-proof type can be used at relevant explosion-proof sites. IP68 remote type can be used underwater. 
9. Variable forms for different kinds of working conditions. Compact and remote form; Flanged, flanged wafer, clamped, threaded, insertion end connection; DC/AC, battery power supply. 
 
Workflow:

 
  SE11 SE12 SE13 SE14
Measuring flow electrically conducting liquids
Precision ±0.5% ±0.25% ±0.5% ±1.5%
Repetition ±0.25% ±0.125% ±0.25% ±0.75%
Medium Temperature -25~130°C -25~130°C -25~200°C -25~130°C
Conductivity ≥5µs/cm (Please consulate with us if it is less than 5μS/cm)
Diameter(mm) 3~2200 3~2200 3~125 300~3000
Pressure Level 0.6Mpa/1.0Mpa/ 1.6Mpa/2.5Mpa/4.0Mpa/Others
Range of Velocity 0.5~10m/s
Flow Direction Positive/negative
Electrode 316L, Hastelloy, Ti, Ta, Pt-Ir
Lining Materials Rubber/PTFE/PFA/F46 PFA PTFE
Form of electrode Standard
Quantity of electrode Two pairs(Measure,grounding) A pair(measure)
Tube 304  304
Flange Carbon steel/304 Stainless steel Stainless steel
Installing form Wafer/flange clamp/thread flange/plunge
Protection Level IP65/IP67/IP68(Divided type)
Power 220VAC±20%  50HZ /24VDC
Signal output 4-20mA
Communicate HART/Modbus/Profibus
Electric Connections 2×M20*1.5
Explosion proof Non-explosion-proof/Exe dib IIB T4explosion proof
Type Integrated type/Divided type
Ambient Temperature -25~60°C

Company Introduction:
Established in 2007, SINIER have more than 90 employees with the total registered capital of 15 millions Yuan,covering 20000 square meters area, which is company property.It is the only company that has the largest and most advanced liquid and gas calibration device equipment .
Intelligent Electromagnetic Flowmeter for Conductive Liquids

Product Range:
Intelligent Electromagnetic Flowmeter for Conductive Liquids
Intelligent Electromagnetic Flowmeter for Conductive Liquids

Workshop Corner:
Intelligent Electromagnetic Flowmeter for Conductive Liquids

Product Testing:
Intelligent Electromagnetic Flowmeter for Conductive Liquids

Calibration Devices:
Intelligent Electromagnetic Flowmeter for Conductive Liquids

FAQ:
1. Q: Are you a trading company?
A: No, we are a company with industry .
2. Q: Where is your company located?  
A: We are located in No.6 Xinggu Road, Jiangning Development Zone, Nanjing, China.
3. Q:  How do you control the quality?
A:  We ensure that all of our product are produced under ISO9001 quality system, and each product will be inspected and tested by our technicians before shipment.  

Cnc Bending is a process where sheet metal is bent to an angle using, typically a V shaped punch and die. The sheet is placed between the punch and die which presses down on the sheet. This method of bending provides a low cost method to product 3D shapes from 2D sheets. CNC Bending is a suitable for processing most ductile metals and primarily for sheet metal designs with one or more bends. Just a few examples of are brackets, enclosures, cams, chassis, etc. There is generally no special tooling required, with the exception of intricate designs and special bends.

CNC Bending

Cnc Bending,Cnc Bending Machine,Cnc Pipe Bender,Cnc Wire Bender

Chongqing Jin Te Rui Machine Co.,Ltd , https://www.die-casting-machine.com