Details The Sysmex FPIA-3000 particle analyzer can be used to repeatedly and routinely characterize the particle size and shape of suspension or emulsion samples. The unique scattergram data display can correlate various shape description information with particle size and record the images of all particles in the sample to assist in data interpretation. This system is particularly suitable for particle shape sensitive applications such as toners, abrasives, ceramics and pharmaceuticals to detect differences between different samples.
Sysmex FPIA-3000 particle analyzer main features - particle size measurement range: 0.8 祄 -300 祄 - highly sensitive particle shape measurement, using multiple parameters such as width, long length, ring, aspect ratio and convexity - can measure water Phase and non-aqueous systems - patented sheath flow technology ensures that all particles are clear, oriented and separate - records all particle images - completely automated measurement steps including cleaning process and diagnostic check- Software features include: result database, report design, secure access system, solution that meets FDA 21CFR Part 11 requirements
The inlaid spiral finned tube is to pre-process the spiral groove of a certain width and depth on the steel pipe, and then inlay the steel strip on the steel pipe on the lathe. During the winding process, due to a certain pre-tightening force, the finned tube steel strip will be tightly clamped in the spiral groove, thus ensuring a certain contact area between the steel strip and the steel tube. In order to prevent the steel strip from springing back and falling off, both ends of the steel strip should be welded to the steel pipe.
In order to facilitate inlaying, there should be a certain side clearance between the steel strip and the spiral groove. If the side clearance is too small and interference is formed, it will be difficult for the mosaic process to proceed smoothly. In addition, the wound steel strip always has a certain springback, as a result, the steel strip and the bottom surface of the spiral groove cannot be well joined. Inlaid fins can be carried out on general-purpose equipment, and the cost is not high, but the process is complicated and the production efficiency is low.
Inlaid Finned Tube,Inlaid Finned Tubes,Inlaid Fin Tube
Wuxi Mcway Equipment Technology Co., LTD , https://www.mcwayfinnedtube.com