Product Name: Pallet Mould/Mold
Product material: As per customer requirement.
Pallet Mould/Mold cavity: As per customer requirement
Pallet Mould/Mold size: Depends on your design.
Pallet Mould/Mold material: P20, 718...
Pallet Mould/Mold life: 100k shots
Pallet Mould/Mold Runner system: HOT runner
Pallet Mould/Mold features: Good quality
Injection cycle time: 145seconds
Tooling time: 100days
MELEE MOULD Co., Ltd service process for Plastic Pallet Mould/Mold
1. Design/sample: Product, mould, etc.
2. Discussion: Mould material, cavity number, price, runner, payment, etc.
3. Order placed: According drawing or your samples.
4. Design mould: We will send mould design to customer for confirmation
5. Mould tooling: We start to make mould after mould design confirmed
6. Mould processing: Send pictures to customer every week for the customer to know the mould processing.
7. Mould shot trial: Send mould shot trial samples to customer to confirm mould quality
8. Delivery: Ship mould after mould quality confirmed.
| Product Name | Pallet Mould/Mold |
| Size | 1450x1450x500mm |
| Product description | as per customer requirment |
| Pallet Mould/Mold cavity | 1cavity |
| Plastic Pallet Mould/Moldsize | 1800x1800x800mm |
| Suitable machine | Around 6000T |
| Pallet Mould/Mold material | P20, 718 |
| Plastic Pallet Mould/Mold life | 100k shots |
| Plastic Pallet Mould/Mold runner system |  Hot Runner |
| Ejection system |  Ejector pin |
| Plastic Pallet Mould/Moldfeatures | Good quality |
| Injection cycle time | 145 seconds |
| Tooling time | 100days |
Â
Hydraulic Engineering Percussion Drilling Rig
Percussion drilling is a manual drilling technique in which a heavy cutting or hammering bit attached to a rope or cable is lowered in the open hole or inside a temporary casing. The technique is often also referred to as 'Cable tool'. Usually a tripod is used to support the tools. By moving the rope or cable up and down, the cutting or hammering bit loosens the soil or consolidated rock in the borehole, which is then extracted later by using a bailer. Just as with hand augering, a temporary casing of steel or plastic may be used to prevent the hole from collapsing. When the permanent well screen and casing are installed, this temporary casing has to be removed.
The percussion borehole drilling rig's technical advantages:
- Unlike any other drilling method, percussion can remove boulders and break harder formations, effectively and quickly through most types of earth.
- Percussion drilling can in principle deal with most ground conditions.
- Can drill hundreds of feet (one well hand-drilled in China in 1923 was over 4000 feet deep).
- Can drill further into the water table than dug wells, even drilling past one water table to reach another.
Hydraulic Engineering Percussion Rig,Big Cable Percussion Drilling Rig,Large Diameter Construction Percussion Rig
Henan YK Prospecting Machinery Co., Ltd , https://www.yikyuirig.com