Model NO.: TC0672
Clearance: 254-305mm(10"-12")radial,depending on pipe diame
Feed Method: Positive, non-slip chain drive.
Finish: Paint
Cutter Speed: Adjustable 0-60RPM
Installation: Vertical or horizontal installation
Operating Dimension: 610X510X280mm
Operating Weight: 100kg
Trademark: Bohyar
Transport Package: Wooden Case/Metal Case
Specification: TC0672
Origin: Suzhou, Jiangsu, China
Travel Cutter
★ Introduction:
TC Series of Pipe Cutting and Beveling Machine is the pipe processing equipment independently developed by BHY based on the market and prospect of pipe service industry. The products are portable, precise, and efficient and in modular design, fully meeting customer demands, so they are the perfect choice for the cutting and beveling of various pipes.
★ Industry Application:
It is widely used in long-distance transport pipeline, power plant, nuclear power, petroleum, chemical engineering, natural gas, boiler shop, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc. Â
Â
★ Cutting and Beveling tools
We have standard beveling tools of 30°,37° and also can customize the tools.
★ Product Features:
•Compact Design
Easy Set-upLight weight, low profile design needs only 10'' to 12'' of clearance and set up time is 30 minutes or less. Once the adjustable drive chain is pinned together and tensioned around the pipe the machine is ready to operate.
•Standard Weld Prep Capability
Weld preparation detail can be achieved from common 30° and 37-1/2°bevel on standard wall carbon steel.
•Wide range of applications
Available for cutting and beveling in flooded trenches and underwater mud at 600 feet.
Weld preparation detail can be achieved from common 30° and 37-1/2°bevel on standard wall carbon steel.
•Wide range of applications
Available for cutting and beveling in flooded trenches and underwater mud at 600 feet.
•Pipe Line Maintenance
The Bohyar Travel Cutter offers the inherent advantages of a completely sealed and self-lubricating closed loop system. It is particularly suited to field machining operations under the type of hostile conditions often found in pipe line maintenance and construction such as dirt, sand and water.
The Bohyar Travel Cutter offers the inherent advantages of a completely sealed and self-lubricating closed loop system. It is particularly suited to field machining operations under the type of hostile conditions often found in pipe line maintenance and construction such as dirt, sand and water.
•Horizontal and vertical cutting
With hydraulic power, the Travel Cutter will operate on horizontal or vertical pipe, in the field or in the shop.Â
With hydraulic power, the Travel Cutter will operate on horizontal or vertical pipe, in the field or in the shop.Â
•Safe, Cold Cutting
The Bohyar Travel Cutter can be used in explosive conditions, on natural gas, crude, product and fuel lines.
The Bohyar Travel Cutter can be used in explosive conditions, on natural gas, crude, product and fuel lines.
•Fast, Reliable
A standard wall pipe can be cut and beveled with a cutting speed of approximately 2 minutes per 1'' of pipe diameter. Cutting time varies for heavier walls and harder alloys.
•Corrosion resistance
Use stainless steel screws, special bearings, seals and zinc layer including attachment prevents corrosion due to the long-term job in brine that may arise.
A standard wall pipe can be cut and beveled with a cutting speed of approximately 2 minutes per 1'' of pipe diameter. Cutting time varies for heavier walls and harder alloys.
•Corrosion resistance
Use stainless steel screws, special bearings, seals and zinc layer including attachment prevents corrosion due to the long-term job in brine that may arise.
★ Technical ParametersÂ
| Model | TC0672 | Processing Range | 6"-72"(153mm-1829mm) |
| Drive | Hydraulic | Wall Thickness | 5mm-25mm |
| Hydraulic Requirements | 15 gpm @ 1500 psi. (57LPM,106bar) |
Clearance | 254-305 mm (10"-12")radial,depending on pipe diameter. 20"axial(508 mm) |
| Feed Method | Positive, non-slip chain drive. | Finish | Paint |
| Cutter Speed | Adjustable 0-60RPM | Installation | Vertical or horizontal installation |
| Operating Dimension | 610x510x280(mm) | Operating Weight | 100kg |
| Hydraulic Control | Cutter on-off, feed on-off. Flow control valves which can adjust feed speed. Separate controls, providing adjustable feed and cutter speed. Forward/Reverse travel permits machine to be backed up. | ||
★ Wheel Setting
•Pipe O.D :6.00"-13.99"(152mm-355mm) :     Wheel Position: 3&4
•Pipe O.D :14.00"-19.99"(356mm-508mm) :   Wheel Position: 3&5
•Pipe O.D :20.00"-35.99"(508mm-914mm):    Wheel Position: 2&5
•Pipe O.D :36.00"-47.99"(914mm-1219mm):  Wheel Position: 2&6
•Pipe O.D :48.00"-72.00"(1219mm-1829mm): Wheel Position: 1&6
★ Included in our Travel Cutter
•Operating Manual, operating tools and spare chain connecting pins.
•Basic  chain for 6'' dia. pipe
•Steel storage case.
BHY-Reliable On-site Machining Solutions
No. 28Datong Road, Suzhou New District, PR China
Website: www.bohyarglobal.com
One Piece Hose Fittings,1 Inch Hose Connector,Vacuum Hose Connector,Universal Hose Pipe Tap Connector
Ningbo Xintai Industry and Trade Co., Ltd. , https://www.nb-xintai.com