Â
Introduction of KP350-A
This model is used for all kinds of plastic tubes, laminated tubes. It finishes tube-orientation, material filling, tail sealing, coding and tail cutting automatically. Therefore, it is very popular among the industries of cosmetics, pharmacy food and daily chemicals.
III. Features and Performance of KP350-A
1,The tube is manually feeded into the tube holder.
2,Original Swiss LEISTER heating gun is adopted .
3,After the sealing, the wind cooling system is adopted to prevent the heat from being conducted to the ointment.
4,PLC automatic control system.
5,High quality stainless steel frame.
6,Automatic completion of filling, sealing and batch No. printing in one machine.
7,The production capacity can be realized and control automatically, normal speed is 20~30pcs/min
8,No tube no fill, preventing a waste of the materials
IV. Technical Parameter
| Model | KP350-A | ||
| Power Supply      | 220V/50Hz | ||
| Power Rate | 3.2KW | ||
| Air pressure     | 0.6-0.8MPa | ||
| Air volume      | <0.6m³/min | ||
| Filling Range     | 5-50ml | 50-100ml | 100-250ml |
| Filling Precision   | ≤±1℅ | ≤±1.25℅ | ≤±1.5℅ |
| Filling capacity | 20-30pcs/min | ||
| Tube Diameter   | ф15-40mm/ф40-50mm | ||
| Dimension  | 1200mm×900mm×1600mm | ||
| Weight   | 350kg | ||
V. Configuration Table
| Name | Brand | Qty | Origin |
| Touch Screen | Delta | 1 set | Taiwan |
| PLC | Delta 32ES | 1set | Taiwan |
| Temperature controller | Delta/K grade | 1set | Taiwan |
| Mark sensor | SICK | 1set | German |
| Pneumatic element | Airtac | 1set | Taiwan |
| Motor | YS7124 | 1set | Shanghai, China |
| Heating element | LEISTERLE  3000 | 1set | Swiss |
| Air pump | XGB/370W/220V | 1set | Shanghai, China |
| Reducer | WD48  1:50-B | 1set | Shanghai, China |
ORDER REQUIREMENT:
1 WHAT IS YOUR TUBE ? PLASTIC TUBE OR ALUMINUM TUBE?
2 WHAT IS THE DIAMETER OF YOUR TUBE ? LENGTH Â AND DIAMETER?
3 HOW MUCH THE FILLING CAPACITY DO YOU NEED?
4 WHAT SPEED DO YOU NEEDÂ
Â
Â
Â
Car polishing refers to polishing the car before waxing, sealing or coating during car beauty. In the Car Cleaning and car washing industry, Car Wax and car polish are often used alternately. For ordinary people who want to polish their cars, it may be an expensive mistake not to distinguish between car wax and car polish. Polishing is a paint correction process to remove the defects on the surface of your car, while waxing is to lay a protective coating on the paint of the car as a detailed finish.
Car polish is a substance used to improve the appearance of a vehicle's exterior by removing minor scratches, swirl marks, and other imperfections. It is typically made of a combination of abrasive particles and oils or waxes that help to smooth out the surface of the paint and provide a protective layer. Car polish is applied using a soft cloth or polishing pad and is usually buffed off after it has dried to reveal a glossy, shiny finish. It is important to choose the right type of car polish for
Car Polish,Swirl Remover Polish,Car Leather Polish,Polish Wax Spray
Jiangyin yinghuameng Houseware Co.,Ltd. , https://www.yhmcarcare.com