Single Screw Waste Plastic Granulating Machine with Die Face Cutting

This machine is mainly used for extrusion of the thermoplastics such as PVC, PE, PP, and ABS, Equipped with the related auxiliary machinery(including die), it is applied for pelletizing and processing various plastic products, such as films, pipes, bars, sheets, wires, cable insulator and hollow article.



SJ-150 single-screw
1. L/D: 30: 1
2. Screw diameter: Φ150
3. AC motor power: 90kW
4. Rotary speed: 10~120rpm
5. Cooling method: Force wind cooling
6. Lubrication way: Oil dipping
7. Venting: 1
8. Vacuum pump power: 3kw
9. Feeder: Force feeder
10. Hydraulic screen changer

Technical parameters
Heating method: Cast aluminum heater
Pelletizing method: water ring die face cutting method
Capacity: About 300kg/h

5m³ big storage silo to contain raw material(Squeezed film after washed)


Feeding method: belt conveyor to feed raw material into the feeder of extruder


Degassing zone: two degassing port


Cutting method: water-ring die face cutting system


Pellets


In-sale:
• Detailed design of lay-out that is the position of the procession
• Technological information of provided products
• Schedule about design,manufacturing and installation 
• Working & Producing progression
• Training course for the technician so that the installation is safe and standard

After-sales service:
1. Send engineers to install, test the machines and offer technology guidance and worker training at customers' factory.

2. Offer 12 months free maintenance and life long service. After the warranty period, spare parts will be provided at basic cost.

3. Build customers database. All machines are traceable.

4. Visit customers and make quality trace periodically and take customers' feedback into account during routine practices.

5. Speed up service and spare parts supply.

Feel free to contact with me if you want to leanr more information.
Contact persion:Ms. Laura
Mob.:86 159 6236 6319 This machine is mainly used for extrusion of the thermoplastics such as PVC, PE, PP, and ABS, Equipped with the related auxiliary machinery(including die), it is applied for pelletizing and processing various plastic products, such as films, pipes, bars, sheets, wires, cable insulator and hollow article.



SJ-150 single-screw
1. L/D: 30: 1
2. Screw diameter: Φ150
3. AC motor power: 90kW
4. Rotary speed: 10~120rpm
5. Cooling method: Force wind cooling
6. Lubrication way: Oil dipping
7. Venting: 1
8. Vacuum pump power: 3kw
9. Feeder: Force feeder
10. Hydraulic screen changer

Technical parameters
Heating method: Cast aluminum heater
Pelletizing method: water ring die face cutting method
Capacity: About 300kg/h

5m³ big storage silo to contain raw material(Squeezed film after washed)


Feeding method: belt conveyor to feed raw material into the feeder of extruder


Degassing zone: two degassing port


Cutting method: water-ring die face cutting system


Pellets


In-sale:
• Detailed design of lay-out that is the position of the procession
• Technological information of provided products
• Schedule about design,manufacturing and installation 
• Working & Producing progression
• Training course for the technician so that the installation is safe and standard

After-sales service:
1. Send engineers to install, test the machines and offer technology guidance and worker training at customers' factory.

2. Offer 12 months free maintenance and life long service. After the warranty period, spare parts will be provided at basic cost.

3. Build customers database. All machines are traceable.

4. Visit customers and make quality trace periodically and take customers' feedback into account during routine practices.

5. Speed up service and spare parts supply.

Feel free to contact with me if you want to leanr more information.
Contact persion:Ms. Laura
Mob.:86 159 6236 6319

Steel Forging Parts

Steel forgings improve the internal structure and mechanical properties of the forgings during the forging process. Therefore, forgings have high mechanical strength, are not easy to break, and improve toughness. They are generally used in parts that require large stress, or parts with harsh working environments, such as gears or engine shafts. In addition to improving mechanical properties, forging has the advantages of high utilization of materials and high productivity. For some parts that require precision assembly or high precision, it can be achieved by secondary precision CNC machining. However, due to the characteristics of the forging process, forging is not suitable for the production of workpieces with complex shapes, or requires a relatively large amount of subsequent CNC machining to achieve products with complex shapes.

For forged parts, the most important are the three processes of mold development, forging processing and secondary precision CNC processing. And these three processes are all completed in-house, we can better ensure product quality and production delivery. We take quality first and service first for our customers.

Steel Forging Parts, Steel Forgings, Carbon Steel Die Forging, Carbon Steel Forging Parts, Carbon Steel Forgings, Iron forgings, Cast Iron Forging, Steel Forging, Iron Forgin, Metal Forging

Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com