In today's society, with the continuous improvement of the economic level, people's lives have undergone tremendous changes. At the same time, people's thoughts have also changed. No matter whether it is the state or the enterprise, it has made many demands on the workers' working environment. When many people work on the construction site, companies not only take many measures in terms of safety, but also make a lot of efforts in the prevention and treatment of occupational diseases. Many companies take dust reduction measures for the construction site. It is not difficult to find that many sites now have sprinklers, but many sprinklers have been damaged for some time after they are bought. Why? In fact, they did not know the car buying skills when they purchased the site sprinkler , resulting in being deceived by many manufacturers. Now. Today, Xiao Bian talked about the purchase techniques for site sprinklers in detail.
The first is to select the tonnage capacity of the sprinkler according to the environment of the construction site and the width of the road, so as to prevent the phenomenon of being too large or too small after the purchase, thereby causing unnecessary trouble to the construction party.
Secondly, before the purchase, it is necessary to select different types of sprinklers according to the construction conditions of the job site and the conditions of the road surface, and to select differently adapted tire vehicles according to the situation.
Thirdly, due to poor road conditions at the construction site, there may be some minor problems with the vehicles. Therefore, when shopping for sprinklers, we must select vehicles with higher grounds because repair operations can be performed in time when problems occur.
Fourth, regarding the choice of sprinkler pumps, a reasonable choice is made based on the maximum injection engine power required at the site.
Fifth, the selection of tanks, the use of carbon steel on the tank material, as much as possible to prevent the tank body rust.
Sixth, regarding the choice of manufacturers, we must choose the regular old brand manufacturers, because their various facilities and accessories in the vehicle are very reliable, and the quality is also worthy of guarantee. In this way, the number of repairs can be reduced.
The above is an introduction to the purchase of sprinkler trucks on site . I hope to help everyone. Therefore, before buying, we must consider the above purchase of sprinkler trucks to buy the skills and in-depth understanding, so as to be able to buy quality durable and qualified sprinklers.
Grinding curved lines
Upper thigh wave abrasion and lower thigh fish scale injury
Simultaneous polishing and repairing of steel rails on both sides
Up to 150 meters per hour
Operation efficiency is 20 times higher than manual polishing
Wheel rail coupling relationship reaches optimal state
Significant reduction in vehicle shaking phenomenon
Science and technology are the primary productive forces
It is also the first driving force for promoting efficiency improvement
GMC-12-II Rail Grinding Car
Fighting is on the front line of maintaining equipment quality
Releasing technological vitality
Rail track grinding car,Polishing car,rail grinding vehicle,Railway track grinding car,Rail grinding vehicles for railways
Safe Seal Technology Co., Ltd. , https://www.jsspreals.com