In the decades of development, the drying equipment industry has experienced growth from scratch and from small to large. Although China's drying equipment industry started late, but relying on the rapid development of China's chemical, pharmaceutical, food and other industries, the market demand for China's drying equipment industry is huge. However, at present, China's dependence on drying equipment is too high, and the competitiveness of localized products is insufficient.
The market demand for drying equipment has increased According to the analysis and prediction of the drying equipment branch of China General Machinery Industry Association, in the next few years, the demand for drying equipment in China will increase significantly in the following areas. In the field of grain drying, small drying equipment for rice and wheat drying (below 5 tons/hour) is expected to reach an annual demand of about 1,000 units; the annual demand for drying equipment for chemical industry will reach 3,000 units (sets). Around the year; the annual demand for drying equipment for pharmaceuticals will reach around 3,000 sets (sets); the annual demand for drying equipment for agricultural and forestry products will reach around 2,000 sets (sets); the annual demand for light industrial drying equipment will reach 2000. Taiwan (sets) around.
In the type of drying equipment, atmospheric pressure drying equipment and vacuum drying equipment will be mainly used. The demand for special fields such as far-infrared drying equipment, microwave drying equipment, etc. will gradually increase; in terms of food and medicine drying, the demand for vacuum freeze-drying equipment of larger specifications will increase, with a functional combination (such as The demand for equipment for grain-drying, drying-filtration will also increase; highly automated drying equipment will be welcomed in some application areas.
As far as the domestic market is concerned, as China's drying equipment industry has begun to enter a more mature stage of development, it has been able to better meet the actual needs of users in various fields, and in the price only 1/3 of the same foreign products, which makes China's drying equipment In the market competition, there are obvious price advantages over imported equipment; on the other hand, due to the large volume of drying equipment, most of them involve on-site installation, commissioning, and after-sales service. Therefore, for domestic users, the use of domestic equipment is more preferable. Imported equipment is more convenient.
As far as the international market is concerned, China's major exporter of drying equipment is vacuum drying equipment, vibration drying equipment, drying equipment for small and medium-sized grain, food, and agricultural and forestry native products. The annual export volume exceeds 200 units. The main export areas are Southeast Asia and other developments. China, and began to expand to the European and American markets. In the international competition, the main competitors of China's drying equipment manufacturers are companies in Denmark, Switzerland, the United Kingdom, Germany, the United States, and Japan. Compared with competitors, the advantage of drying equipment in China is low price, but the degree of automation control, appearance quality, completeness and functional combination of the product still need to be further improved.
Insufficient local competitiveness China's current drying equipment is difficult to compete with foreign countries, mainly due to the lack of mastery of core technology, due to the fact that China's drying equipment production process technology has a gap of nearly 10 years compared with foreign countries, domestic companies are small and scattered, and the industry is concentrated. The degree is not high, although China is currently engaged in the development and production of drying equipment, but most companies lack the core technology and can only engage in small-scale system integration, installation and support.
The long-term technical backwardness has caused the drying equipment industry in China to face the realm of internal and external problems. Due to its small scale and application, it has not formed sufficient scale applications, mostly relying on multi-species and small-batch production. Although the production cost is high, the sales price is high. It is very low, on the one hand, there is fierce competition in the country, on the other hand there is no advantage in the world, and there is no competitiveness compared with foreign products.
Judging from the current development status, the development of China's drying equipment industry still has a large gap compared with the world's advanced level. There are still many problems in its development. First, the level of technology is low, the quality of precision drying equipment is poor, and the precision is high. The manufacture of drying equipment is still difficult, and core technologies and key products still rely on imports. Large processing allowances, serious energy consumption and raw material consumption of drying equipment, long processing cycles, and low production efficiency have become bottlenecks that restrict the development of the industry. Second, there are fewer companies with R&D capabilities in the entire industry chain, and there is not enough willingness for R&D. Precision drying equipment is a product of a large number of production technologies and production processes. If there is no definite R&D investment product that has remained at the low end, it will be phased out by the tide of the times.
Experts from the China Food Machinery Equipment Network believe that there is a huge market potential for drying equipment, but the drying equipment industry in China is facing an embarrassing situation. Despite the vast market, due to the lack of core technologies, the development of the local industry is lagging behind. It is an urgent question to be solved how to make the drying equipment cost-effective, high-quality, high-reliability, large-scale, and large-scale mass production.
Research and development of advanced technologies to enhance product quality The future competition landscape will remain brand, quality and channels. In particular, future market competition will no longer be a competition among domestic companies. The world's leading drying equipment manufacturers, such as the Danish Nelu Group and Japan’s Okawara Corporation, have already set up branch offices in China to seize the Chinese market, and foreign companies acquire The actions of Chinese companies are accelerating.
The increasingly fierce competition requires that our enterprises must improve their product quality through technological advancement, the absorption of advanced foreign technology, and independent innovation. The idea of ​​product development should focus on the large-scale equipment, the degree of automation of control, the surface treatment quality of equipment, and the selection of corrosion-resistant materials, and develop multi-functional combined machines to promote the continuous extension of the product life cycle. Industry associations should organize more enterprises to participate in international technical exchanges, absorb the latest technological achievements, and accelerate the improvement of the industry-wide technology level.
At present, there are dozens of universities and research institutes in China that are engaged in research and development of drying technology. They are distributed in the east, west, north and south of China, but most of the knowledge achievements have not been effectively translated into actual productivity. Enterprises must become the main body of technological innovation and should directly cooperate with these universities and research institutes in various forms to make resources be reasonably allocated and utilized, and to effectively cultivate and develop the innovative capabilities of enterprises.
In addition, drying equipment companies should guide and coordinate through industry associations to change the blind development. Relatively concentrated enterprises in Jiangsu, Zhejiang, and Shanghai can consider the use of joint ventures, cooperation, and acquisitions to migrate to the central and western regions in search of a broader space for corporate survival and development. Enterprises in the industry should take the road of strong alliances and develop large companies and enterprise groups with strong technical strength, well-known brands, and independent intellectual property rights in the industry. Form your own specialty products and special services.
Xiao Bian concludes: The lack of local competitiveness has seriously hampered the development of the domestic precision drying equipment industry. When China's precision drying equipment industry meets the international advanced level, it must start with fundamental issues. We must constantly strive to upgrade production equipment and attach importance to technological innovation. R&D to improve the quality of drying equipment is a core issue. Only by overcoming these problems can we make the domestic precision drying equipment industry move toward a prosperous road.
The market demand for drying equipment has increased According to the analysis and prediction of the drying equipment branch of China General Machinery Industry Association, in the next few years, the demand for drying equipment in China will increase significantly in the following areas. In the field of grain drying, small drying equipment for rice and wheat drying (below 5 tons/hour) is expected to reach an annual demand of about 1,000 units; the annual demand for drying equipment for chemical industry will reach 3,000 units (sets). Around the year; the annual demand for drying equipment for pharmaceuticals will reach around 3,000 sets (sets); the annual demand for drying equipment for agricultural and forestry products will reach around 2,000 sets (sets); the annual demand for light industrial drying equipment will reach 2000. Taiwan (sets) around.
In the type of drying equipment, atmospheric pressure drying equipment and vacuum drying equipment will be mainly used. The demand for special fields such as far-infrared drying equipment, microwave drying equipment, etc. will gradually increase; in terms of food and medicine drying, the demand for vacuum freeze-drying equipment of larger specifications will increase, with a functional combination (such as The demand for equipment for grain-drying, drying-filtration will also increase; highly automated drying equipment will be welcomed in some application areas.
As far as the domestic market is concerned, as China's drying equipment industry has begun to enter a more mature stage of development, it has been able to better meet the actual needs of users in various fields, and in the price only 1/3 of the same foreign products, which makes China's drying equipment In the market competition, there are obvious price advantages over imported equipment; on the other hand, due to the large volume of drying equipment, most of them involve on-site installation, commissioning, and after-sales service. Therefore, for domestic users, the use of domestic equipment is more preferable. Imported equipment is more convenient.
As far as the international market is concerned, China's major exporter of drying equipment is vacuum drying equipment, vibration drying equipment, drying equipment for small and medium-sized grain, food, and agricultural and forestry native products. The annual export volume exceeds 200 units. The main export areas are Southeast Asia and other developments. China, and began to expand to the European and American markets. In the international competition, the main competitors of China's drying equipment manufacturers are companies in Denmark, Switzerland, the United Kingdom, Germany, the United States, and Japan. Compared with competitors, the advantage of drying equipment in China is low price, but the degree of automation control, appearance quality, completeness and functional combination of the product still need to be further improved.
Insufficient local competitiveness China's current drying equipment is difficult to compete with foreign countries, mainly due to the lack of mastery of core technology, due to the fact that China's drying equipment production process technology has a gap of nearly 10 years compared with foreign countries, domestic companies are small and scattered, and the industry is concentrated. The degree is not high, although China is currently engaged in the development and production of drying equipment, but most companies lack the core technology and can only engage in small-scale system integration, installation and support.
The long-term technical backwardness has caused the drying equipment industry in China to face the realm of internal and external problems. Due to its small scale and application, it has not formed sufficient scale applications, mostly relying on multi-species and small-batch production. Although the production cost is high, the sales price is high. It is very low, on the one hand, there is fierce competition in the country, on the other hand there is no advantage in the world, and there is no competitiveness compared with foreign products.
Judging from the current development status, the development of China's drying equipment industry still has a large gap compared with the world's advanced level. There are still many problems in its development. First, the level of technology is low, the quality of precision drying equipment is poor, and the precision is high. The manufacture of drying equipment is still difficult, and core technologies and key products still rely on imports. Large processing allowances, serious energy consumption and raw material consumption of drying equipment, long processing cycles, and low production efficiency have become bottlenecks that restrict the development of the industry. Second, there are fewer companies with R&D capabilities in the entire industry chain, and there is not enough willingness for R&D. Precision drying equipment is a product of a large number of production technologies and production processes. If there is no definite R&D investment product that has remained at the low end, it will be phased out by the tide of the times.
Experts from the China Food Machinery Equipment Network believe that there is a huge market potential for drying equipment, but the drying equipment industry in China is facing an embarrassing situation. Despite the vast market, due to the lack of core technologies, the development of the local industry is lagging behind. It is an urgent question to be solved how to make the drying equipment cost-effective, high-quality, high-reliability, large-scale, and large-scale mass production.
Research and development of advanced technologies to enhance product quality The future competition landscape will remain brand, quality and channels. In particular, future market competition will no longer be a competition among domestic companies. The world's leading drying equipment manufacturers, such as the Danish Nelu Group and Japan’s Okawara Corporation, have already set up branch offices in China to seize the Chinese market, and foreign companies acquire The actions of Chinese companies are accelerating.
The increasingly fierce competition requires that our enterprises must improve their product quality through technological advancement, the absorption of advanced foreign technology, and independent innovation. The idea of ​​product development should focus on the large-scale equipment, the degree of automation of control, the surface treatment quality of equipment, and the selection of corrosion-resistant materials, and develop multi-functional combined machines to promote the continuous extension of the product life cycle. Industry associations should organize more enterprises to participate in international technical exchanges, absorb the latest technological achievements, and accelerate the improvement of the industry-wide technology level.
At present, there are dozens of universities and research institutes in China that are engaged in research and development of drying technology. They are distributed in the east, west, north and south of China, but most of the knowledge achievements have not been effectively translated into actual productivity. Enterprises must become the main body of technological innovation and should directly cooperate with these universities and research institutes in various forms to make resources be reasonably allocated and utilized, and to effectively cultivate and develop the innovative capabilities of enterprises.
In addition, drying equipment companies should guide and coordinate through industry associations to change the blind development. Relatively concentrated enterprises in Jiangsu, Zhejiang, and Shanghai can consider the use of joint ventures, cooperation, and acquisitions to migrate to the central and western regions in search of a broader space for corporate survival and development. Enterprises in the industry should take the road of strong alliances and develop large companies and enterprise groups with strong technical strength, well-known brands, and independent intellectual property rights in the industry. Form your own specialty products and special services.
Xiao Bian concludes: The lack of local competitiveness has seriously hampered the development of the domestic precision drying equipment industry. When China's precision drying equipment industry meets the international advanced level, it must start with fundamental issues. We must constantly strive to upgrade production equipment and attach importance to technological innovation. R&D to improve the quality of drying equipment is a core issue. Only by overcoming these problems can we make the domestic precision drying equipment industry move toward a prosperous road.
Water Acid-base Adjusting Agent PH+
Granular Sodium Carbonate,Sodium Carbonate Conductivity,Swimming Pool Used Sodium Carbonate,Swimming Pool Ph Regulator
Henan Kepeiao New Materials Co.,Ltd. , https://www.kopeochem.com