According to Yang Yexin, general manager of China National Offshore Oil Corporation, CNOOC Natural Gas Fertilizer Project (Fujishima Phase II) uses Dongfang 1-1 gas field natural gas as raw material and is designed to produce 450,000 tons of synthetic ammonia and 800,000 tons of large-particle urea annually. This project is a national key construction project of the “Tenth Five-Year Plan†and is also the largest single urea plant in China. It is the first downstream project to be built by CNOOC.
The project covers an area of ​​53 hectares, including a green area of ​​20 hectares. The main project of the project started construction in January 2002. Chemicals were fed on September 12, 2003. On September 30, 2003, qualified products were produced two months ahead of schedule, and it took only 18 days from the start of production to the production of qualified products. After successful commissioning, after one year of trial production, the production capacity of the device reached 105% of the design capacity, and the production cost was only 98.3% of the contracted value. The preliminary design estimate for the project is 2.686 billion yuan, and the actual investment is 2.19 billion yuan, saving about 490 million yuan.
Last year was the first year of trial production of this project. In the whole year, a total of 841,700 tons of large-granule urea was produced. It reached the record of the designed production capacity in the first year after the domestic large-scale fertilizer plant was put into operation, and the product quality and “three wastes†emission targets were all met. Contract requirements. In April last year, the site was inspected and approved by the Chemical Industry Engineering Quality Supervision Station. There were a total of 106 projects in the project, with a pass rate of 100% and an excellent and good rate of 92.5%. The overall project quality was rated as excellent. At the same time, the project also won the 2004 National Chemical Industry Quality Engineering Award.
Cycloaliphatic Epoxy Resins, also known as CCP (Cycloaliphatic Epoxy Resin), are a type of high-performance epoxy resin. They are a subclass of epoxy resins that are based on cycloaliphatic compounds, which offer unique advantages over other types of epoxy resins.
CCP epoxy resins offer excellent mechanical properties, such as high strength, stiffness, and dimensional stability. They also have excellent chemical resistance and can withstand exposure to harsh chemicals, acids, and solvents. In addition, they have excellent electrical properties, including high dielectric strength and low dielectric constant.
CCP epoxy resins are commonly used in a wide range of applications, such as coatings, adhesives, laminates, and composites. They are particularly well-suited for applications that require high performance and durability, such as aerospace, marine, and electronic applications.
One of the unique advantages of CCP epoxy resins is their ability to cure at low temperatures. This makes them ideal for use in applications where high temperatures cannot be used, such as in the electronics industry. They can also be cured quickly, which can reduce processing times and increase productivity.
CCP epoxy resins are available in a variety of grades, each with its own unique properties and applications. They can be used alone or in combination with other resins to achieve specific performance characteristics.
In summary, CCP epoxy resins are a type of high-performance epoxy resin that offer excellent mechanical, chemical, and electrical properties. They are commonly used in applications that require high performance and durability, such as aerospace, marine, and electronic applications. They are unique in their ability to cure at low temperatures and quickly, making them ideal for use in the electronics industry.
Ccp Epoxy Resins,Polyamide Epoxy Resin,Natural Casting Resin,Epoxy Vinyl Ester Resin
Shanghai Shengduan Trading Co., Ltd. , https://www.shsdchem.com