Waste Tire Recycling Rubber Machine / Rubber Powder Making Machine

Waste Tire Recycling Rubber Machine / Rubber Powder Making Machine
 

Introduce of waste tire recycling rubber machine:

The full-auto scrap rubber tires recycling machine line includes rubber crusher machine and accessory machines,accessory machines consist of debeader,whole tire cutter,whole tire shredder,conveyor equipments,shaking screen,magnet separator,fiber separator,if you need the fine powder,you still need the fine grnder machine.

1.To granulate radial tires into fine rubber crumb of 40~120 mesh with steel and fiber completely recycled at ambient temperature.
 

2.The input is whole tires,after the processing,steel is completely separated and fiber can be separated up to 99% or above.The finish product is high and competitive in the market.
 

3.Tight construction, small space and simple technique flow.
 

4. Low energy-consuming and good performance-cost ratio
 

5.Hight automatization, fewer labours requirements.
 

6.Reasonable construction,easy operation and low rate of breakdown
 

7.Environmental-protection,no pollution(no waste gas,no waste residue,no polluted water),meeting the environmental requirements of the government

Pictures of waste tire recycling Machine:

the whole line of full-autometic waste tire recycling machine:

Main machine-whole tire shredder(ZPS-900/ZPS-1200):

1) Model: ZPS1200                             

2) Size of feeding: ≤1200 whole type         

3) Size of Discharge: < =60*60mm                    

4) Capacity(kg/h): 2500-3000                       

5) Main motor (2 motors ): 55KW*2=110KW  ,                            

6) Dimension(L*W*H)(m) :  3.8*2.1*3.5       

7) Number of knife: 20 PCS 

8) Rotary speed: about 28 r/min       

9) Weight(t) :16500kgs

10)  REMARKS: 10.1 gear box:  hardness teeth,  Model: ZSY315, not ZQ series

          10.2, knives: material: H3 , Germany standard   , forged, heat treatment by high frequency, 

Main machine-tire crusher machine(XKP-400/SKP-450/XKP-560)

Analysis for output :

1).XKP400 rubber crusher:

Output: 4500-6000kg/24 hour for about 20 mesh granule.

2).XKP450 rubber crusher:

Output :7000-12000kg/24 hour for about 20 mesh granule.

3).XKP560 rubber crusher:

Output : 10000-17000kg/24 hour for about 20 mesh granule.

other main machines
debeader:



tyre cutter:

full-auto waste tire recycling line:

Characteristic of waste tire recycling machine:

 

1. Environmental protection and energy saving: no waste water, waste gas, using  circulating water cooling. Plasticizing powder

consumption per ton of 100-170KW;

2. Safety: atmospheric pressure conditions of production, the operator feeding on the ground;

3. Easy operation: PLC control, man-machine interface operation;

4. Each module has a real-time measurement value of feeding, discharging, water temperature into the PLC control system;

5. Each module individually sets temperature, temperature error within ± 1 °C;

6.Using electromagnetic heating or heat conduction oil furnace in two ways;

7.Products do not stick on conveyer, no need to clean up, with production while cleaning function;

8.Process parameters of memory function, memory function formula, etc;

9.Easy installation and maintenance, safe and reliable and remote maintenance.

Single hook debeader:

Model: LS 1200

Capacity:20-40 tires/hour

Pulling force(T): 13

Max.tire diameter 1200mm

Power(KW): 11KW

Stroke distance: 1300mm

Dimension(L*W*H): 3.6*0.78*1.02

Weight: 3500KG

Tire cutter machine:

Model :WTC1200

Capacity:-3500kg/h   

Motor power:5.5kw

Tire range:Max 1200mm

dimension:2080*1000*2130mm

Finber separator:

Model :FS110

capacity:500kg/h

Motor power:5.5kw

dimension:1.5*1.5*3.4(m)

weight:about 1.5T

Waste Tire Recycling Rubber Machine / Rubber Powder Making Machine
 

Introduce of waste tire recycling rubber machine:

The full-auto scrap rubber tires recycling machine line includes rubber crusher machine and accessory machines,accessory machines consist of debeader,whole tire cutter,whole tire shredder,conveyor equipments,shaking screen,magnet separator,fiber separator,if you need the fine powder,you still need the fine grnder machine.

1.To granulate radial tires into fine rubber crumb of 40~120 mesh with steel and fiber completely recycled at ambient temperature.
 

2.The input is whole tires,after the processing,steel is completely separated and fiber can be separated up to 99% or above.The finish product is high and competitive in the market.
 

3.Tight construction, small space and simple technique flow.
 

4. Low energy-consuming and good performance-cost ratio
 

5.Hight automatization, fewer labours requirements.
 

6.Reasonable construction,easy operation and low rate of breakdown
 

7.Environmental-protection,no pollution(no waste gas,no waste residue,no polluted water),meeting the environmental requirements of the government

Pictures of waste tire recycling Machine:

the whole line of full-autometic waste tire recycling machine:

Main machine-whole tire shredder(ZPS-900/ZPS-1200):

1) Model: ZPS1200                             

2) Size of feeding: ≤1200 whole type         

3) Size of Discharge: < =60*60mm                    

4) Capacity(kg/h): 2500-3000                       

5) Main motor (2 motors ): 55KW*2=110KW  ,                            

6) Dimension(L*W*H)(m) :  3.8*2.1*3.5       

7) Number of knife: 20 PCS 

8) Rotary speed: about 28 r/min       

9) Weight(t) :16500kgs

10)  REMARKS: 10.1 gear box:  hardness teeth,  Model: ZSY315, not ZQ series

          10.2, knives: material: H3 , Germany standard   , forged, heat treatment by high frequency, 

Main machine-tire crusher machine(XKP-400/SKP-450/XKP-560)

Analysis for output :

1).XKP400 rubber crusher:

Output: 4500-6000kg/24 hour for about 20 mesh granule.

2).XKP450 rubber crusher:

Output :7000-12000kg/24 hour for about 20 mesh granule.

3).XKP560 rubber crusher:

Output : 10000-17000kg/24 hour for about 20 mesh granule.

other main machines
debeader:



tyre cutter:

full-auto waste tire recycling line:

Characteristic of waste tire recycling machine:

 

1. Environmental protection and energy saving: no waste water, waste gas, using  circulating water cooling. Plasticizing powder

consumption per ton of 100-170KW;

2. Safety: atmospheric pressure conditions of production, the operator feeding on the ground;

3. Easy operation: PLC control, man-machine interface operation;

4. Each module has a real-time measurement value of feeding, discharging, water temperature into the PLC control system;

5. Each module individually sets temperature, temperature error within ± 1 °C;

6.Using electromagnetic heating or heat conduction oil furnace in two ways;

7.Products do not stick on conveyer, no need to clean up, with production while cleaning function;

8.Process parameters of memory function, memory function formula, etc;

9.Easy installation and maintenance, safe and reliable and remote maintenance.

Single hook debeader:

Model: LS 1200

Capacity:20-40 tires/hour

Pulling force(T): 13

Max.tire diameter 1200mm

Power(KW): 11KW

Stroke distance: 1300mm

Dimension(L*W*H): 3.6*0.78*1.02

Weight: 3500KG

Tire cutter machine:

Model :WTC1200

Capacity:-3500kg/h   

Motor power:5.5kw

Tire range:Max 1200mm

dimension:2080*1000*2130mm

Finber separator:

Model :FS110

capacity:500kg/h

Motor power:5.5kw

dimension:1.5*1.5*3.4(m)

weight:about 1.5T

Electric Chain Hoist

 

Convenient operation and load handling with one hand

 

The Electric Chain Hoist Manulift was developed for handling loads quickly and safely with only one hand. The Electric Chain Hoist is based on the lifting unit of the chain hoist and the control unit. Thanks to the control unit which is rigidly connected to the load handling attachment, the operator only needs one hand to operate the hoist and guide the load. Further strengths:

convenient operation and load guidance with one hand
for all Manulift load handling attachments or specially developed load handling 
simple replacement thanks to quick-change coupling

suitable for right-hand and left-hand operation.

Versatile performance
Two hoist speeds as standard
Versatile adaptability to any task
Simple exchange of the load handling device thanks to quick-change coupling
For right-hand and left-hand operation

 

 

High operating quality
Convenient single-handed handling and guidance of loads weighing up to 250 kg
Quick-change coupling for a variety of load handling attachments (load hooks, pantograph tongs, clamping and shaft grippers, parallel gripper systems, specifically developed load handling attachments)

FAQ:

What is our factory product range?

1) We are specialize in chain block, lever block, Electric Hoist, Webbing Sling, cargo lashing,

Hydraulic Jack, forklift, mini crane, etc.

2) Hoist Accessories: Load chain, wire rope, rigging, hook ,pulley and shackles.

How to order the products? 

Send the inquiry with detail item description or with ITEM number. Tell us the quantity you need, the size of goods, and the packing. 

If there is no packing demand we take it as seaway packing. 

If possible please attach one reference picture to avoid any misunderstanding or any links from our website for we get a better understanding.

About sample:
Cost with free if the quantity small, and the express charge account into buyer`s.

About payment:
T/T, LC in U.S. Dollars or EUR, for small orders, PayPal is ok.

About lead time:
Cause all of our products manufacturer according customers order, 

usually within 35-40 days after receipt of your deposit.

How Will My Order Be Shipped?
Usually shipped by sea, small order or urgent order can by air or by courier after received your agreement. 

How long does it take to receive my order?
According the distance from China to your port. Usually from China to European about 22 days. 

To West of American 20 days. To Asia 7 days or more.

To Middle East more 30 days.

By air or by courier will be faster, within 7 days.
About mini order:
Different products with different limited, please contact us to confirm.

What's your quality guarantee?

We have different kinds of products which can meet different quality standard.

YANFEI QC department will teset products before shipping. We have 100% quality guarantee to customers. We will be responsible for any quality problem.

What's benefit will you bring?

Your client satisfied on the quality.

Your client continued orders.

Your can get good reputation from your market and obtain more orders.

 

Electric Chain Hoist

Electric Chain Hoist,2 Ton Electric Chain Hoist,380V Electric Chain Hoist,Electric Chain Block

Hebei Huaige Hoisting Machinery Group Co., Ltd. , http://www.liftinghoistfactory.com