1. The details of this equipment and the estimated budget are for reference only and cannot be used as the basis for the final investment. Therefore, China Mineral Processing Technology Network will not bear any losses caused by customers building factories according to this schedule.
2. The final selection design should be based on the feasible process test report, combined with the needs of the investor and the actual situation on the site, and can be implemented after professional design personnel design and strict technical argumentation.
3. The price of equipment in this list will fluctuate normally according to market conditions, and some equipment models can also be replaced reasonably under appropriate circumstances.
4. If you have any questions, please ask.
500 tons / day molybdenum plant equipment list
Serial number | model | name | Quantity | price |
1 | 400×600 | Jaw Crusher | 1 set | 75,000 / Taiwan |
2 | 250×1200 | Jaw crusher | 1 set | 82,000 / Taiwan |
3 | SZZ 1500×3000 | Seat vibrating screen | 1 set | 25,000 / Taiwan |
4 | 600×600 | Pendulum feeder | 2 sets | 0.8 million / Taiwan × 2 = 161,000 / Taiwan |
5 | GM 2.4×3.6 | Ball mill | 1 set | 800,000 / Taiwan |
6 | FLG-2000 | Grading machine | 1 set | 170,000/set |
7 | 2000×2000 | Stirring tank | 1 set | 18,000 / Taiwan |
8 | SF-2.8m3 | Flotation machine | 12 slots | 16,000 / slot × 12 = 192,000 |
9 | SF-1.2m3 | Flotation machine | 9 slots | 0.9 million / slot × 9 = 81,000 |
Using the technology of silk-screen printing and high temperature sintering, the surface of stainless steel tube was covered in order by sinter dielectric layer, resistance layer, silver conductor layer and isolation glazes protective layer.
The major series is SUS 430 and 444 as substrate, which is covered by thick film.
The diameter range is φ10mm-φ85mm, length is from 110mm to 262mm, the maximum power is 6KW per tube.
Standard product is in stock. And customized product for special power, voltage and other requirement is available.
GIDAPE® ANDETONG® series stainless steel Thick Film Heating Tube has the following characteristics:
1, Safe and durable high strength: stainless steel substrate, Multi-layer microcrystalline vitreous insulation.
2, Fast heating: heating circuit has temperature rise over 80~150 degrees per second.
3, High utilization rate of heat: directly rapid-heat stainless steel tube, a big heat exchange area, fast replacement, efficiency up to above 98%.
4, Green and environmental protection: pure resistive load, no electromagnetic radiation, good for human body and mind.
5, Special tubular heating structure not only provides a great convenience for special application areas, but also provides an irreplaceable condition for the development of new products.
6, Customized services: we tailor-make electric heat products and provide application solutions for enterprises.
Those new types Thick Film Heater Tubes are special designed for Through-Flow applications, such as Instant Hot Water dispensers, instant water heaters, instant coffee maker, electric heating water faucet, instant water flow heater under sink, industrial water flow heater...
Thick Film Heating Tube
Thick Film Heating Tube,Heating Tube,Radiant Tube Heaters ,Infrared Tube Heater
XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de