Chassis selection

Many users will ask for their own requirements when consulting the truck crane. However, in many cases, the truck crane manufacturers cannot fully meet the requirements of the users, such as the tonnage of the above-mentioned households, the length of the cargo box, the engine horsepower, and the crane. Tonnage.

There are many users who have the intention to modify the truck crane with their own chassis, but because many customers do not have matching chassis models to match their models, they cannot be modified.

Firstly, the single-axle truck-mounted crane is to be introduced. The length of the announcement of the single-axle truck-mounted crane is less than 6.14 meters. Therefore, users who want to make a container longer than this size do not need to consider the single-bridge chassis and the single-bridge crane. The maximum crane tonnage is 8 tons, and the engine horsepower due to different chassis brands can choose a wide range of heavy truck crane with a lot of high-powered engine to match, and most of the other single-bridge crane with engine horsepower is 190 horsepower In the following, the maximum tonnage on a single bridge can reach 8 tons.

Secondly, the small three-axle truck-mounted crane and the rear double-deck truck-mounted crane are generally used with cranes below 10 tons and a small part of the beam thickness of 320mm can be installed with 12 tons of cranes. The tonnage of the upper house is generally 10 tons. -13 tons, the length of the container is generally 7.5 meters - 8.5 meters.

Finally, the tonnage of the four-eighth vehicle occupants is generally about 14 tons. This type of vehicle can carry a maximum of 16 tons of cranes. The length of the container is also within 8.5 meters of the small three-axle axle and the rear double-axle crane. .

PVC WPC Foam Board Machine

PVC WPC Foam Board Machine is applied to produce foam board with width 1220mm to 1830mm, thickness 5mm to 30mm, and with very rigid surface, surface hardness can reach 55-80HRC, which are mostly used for advertising board, cabinet, furniture, constrution template and so on.

1. Size of availabe foam board

Width:1220mm,1560mm,1830mm.

Thickness: 5-30mm

Density: 0.3-0.8g/cm3
2. capacity up to 600kg/h

3. Necessary auxliary machines for PVC foam board making machine:

-PVC Mixer

- hot stamp printer (for furniture foam board)

- waste crusher& PVC miller

- Air compressor

- Water chiller

5. Model of PVC foam board extruder:

Popular Model	SJSZ80	SJSZ92
Extruder	SJZ80/156	SJZ92/188
width	1220mm	Max 1830mm
thickness	5-30mm	Max 30mm
Max capacity(kg/h)	about 300	About 600kg/h

Pvc Wpc Foam Board Machine,wpc/pvc foam board production line,pvc foam board machine,wpc foam board making machine

zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com