DIN Standard Casting Iron Non-Rising Gate Valve

Posted on

Model NO.: BCT-NGV-1
Thread Position of Valve Rod: Inside Gate Valve
Usage: Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
Standard: GB
Application: Industrial Usage, Water Industrial Usage, Household Usage, Power Plant, Sewage Treatment Plant
Body: 304, Wcb Iron, Ggg40, Ductile Iron, Cast Iron
Disc: Ductile Iron, Stainless Steel 304, 316, 1.4526
Seat: EPDM, NBR, PTFE
Shaft: Stainless Steel 410 or 416
Nactuator: Gear Worm
Rubber: EPDM NBR or PTFE
Connection: Flanged
Valve Pressure: Pn10-Pn25
Certification: ISO Ce
Stem Type: Non-Rising
Trademark: BCT
Transport Package: Export Standard Wooden Case
Specification: DN100-DN4000
Origin: China
HS Code: 8481804090
Model NO.: BCT-NGV-1
Thread Position of Valve Rod: Inside Gate Valve
Usage: Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
Standard: GB
Application: Industrial Usage, Water Industrial Usage, Household Usage, Power Plant, Sewage Treatment Plant
Body: 304, Wcb Iron, Ggg40, Ductile Iron, Cast Iron
Disc: Ductile Iron, Stainless Steel 304, 316, 1.4526
Seat: EPDM, NBR, PTFE
Shaft: Stainless Steel 410 or 416
Nactuator: Gear Worm
Rubber: EPDM NBR or PTFE
Connection: Flanged
Valve Pressure: Pn10-Pn25
Certification: ISO Ce
Stem Type: Non-Rising
Trademark: BCT
Transport Package: Export Standard Wooden Case
Specification: DN100-DN4000
Origin: China
HS Code: 8481804090
DIN Standard Casting iron Non-rising Gate valve
 

1) Product information: the gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries

2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150

3) Connection type: flanged type, push-on type, mechanical joint type, plain ends type

4) Material:

a) Body : Ductile Iron GGG500-7

b) Wedge : D/I , core fully vulcanized with NBR or EPDM rubber

c) Wedge Nut : Brass

d) Stem : Stainless steel , BS970 431S29 or DIN17440x20Cr13

e) Gasket : NBR

f) Bonnet : GGG500-7

g) O ring : NBR

h) Washer : Carbon steel or Stainless steel .

5) Size: 50-400mm/2" - 16"

6) Pressure grade: PN10, PN16

7) Coating:

a) Fusion-bonded epoxy 200-250 microns inside and out side

b) Coating as per customers' requirement

8) Package : carton for each item , wooden boxes outside .

No.
1
Body
Ductile cast iron
2
Disc
Ductile cast iron packed with NBR
3
Bolt
CS SS
4
Gasket
EPDM NBR
5
Cover
ductile cast iron
6
Stem
stainless steel
7
O-ring
EPDM Silicone
8
Thrust bearing
Brass
9
Bolt
CS SS
10
Gland
ductile cast iron
11
Dust proof gasket
EPDM/NBR
12
Hand wheel
Ductile cast iron

 

1. Product catalogue:

DIN Standard Casting Iron Non-Rising Gate Valve


2.BCT Customers 

DIN Standard Casting Iron Non-Rising Gate Valve

 

3.Workshop and process


DIN Standard Casting Iron Non-Rising Gate Valve
 

4.Inspection and test

DIN Standard Casting Iron Non-Rising Gate Valve
 

5.Packing

DIN Standard Casting Iron Non-Rising Gate Valve



 
6.Installation and application
DIN Standard Casting Iron Non-Rising Gate Valve

 

 

 

DIN Standard Casting iron Non-rising Gate valve
 

1) Product information: the gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries

2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150

3) Connection type: flanged type, push-on type, mechanical joint type, plain ends type

4) Material:

a) Body : Ductile Iron GGG500-7

b) Wedge : D/I , core fully vulcanized with NBR or EPDM rubber

c) Wedge Nut : Brass

d) Stem : Stainless steel , BS970 431S29 or DIN17440x20Cr13

e) Gasket : NBR

f) Bonnet : GGG500-7

g) O ring : NBR

h) Washer : Carbon steel or Stainless steel .

5) Size: 50-400mm/2" - 16"

6) Pressure grade: PN10, PN16

7) Coating:

a) Fusion-bonded epoxy 200-250 microns inside and out side

b) Coating as per customers' requirement

8) Package : carton for each item , wooden boxes outside .

No.
1
Body
Ductile cast iron
2
Disc
Ductile cast iron packed with NBR
3
Bolt
CS SS
4
Gasket
EPDM NBR
5
Cover
ductile cast iron
6
Stem
stainless steel
7
O-ring
EPDM Silicone
8
Thrust bearing
Brass
9
Bolt
CS SS
10
Gland
ductile cast iron
11
Dust proof gasket
EPDM/NBR
12
Hand wheel
Ductile cast iron

 

1. Product catalogue:

DIN Standard Casting Iron Non-Rising Gate Valve


2.BCT Customers 

DIN Standard Casting Iron Non-Rising Gate Valve

 

3.Workshop and process


DIN Standard Casting Iron Non-Rising Gate Valve
 

4.Inspection and test

DIN Standard Casting Iron Non-Rising Gate Valve
 

5.Packing

DIN Standard Casting Iron Non-Rising Gate Valve



 
6.Installation and application
DIN Standard Casting Iron Non-Rising Gate Valve

 

 

 

These auxiliary brush machines are designed to trim and flag automatically the brooms and brushes with flat or curved profiles. They integrate the functions of trimming and flagging together. Working with the brush making machines, these auxiliary machines can reduce the production processes and increase production output. And dust suction unit is included to remove dust and waste material and keep the machine clean.

Trimming And Flagging Machine

Brush Trimmer, Brush Trimming, Brush Trimming And Flagging Device, Brush Trimming And Flagging Tool, Trimming And Flagging Equipment, Brush Trimming And Flagging Machine

Yangzhou Haixing CNC Brush Machine Co., Ltd. , https://www.brushmachine.com