High-speed machining centers are not suitable for long-term storage. When there are no processing tasks, the machine tools should also be periodically energized. It is advisable to energize them 2 or 3 times a week, each time air-conditioning is about 1 o'clock, to use the heat of the machine tool itself to reduce the humidity inside the machine. , so that electronic components will not be wet, but also in a timely manner to detect whether there is no battery low alarm to prevent the loss of system settings parameters.
Periodically clean or replace the filters or subfilters of each lubrication, hydraulic, and pneumatic system in the high-speed machining center; periodically check the hydraulic system, add and replace hydraulic oil, and regularly discharge water to the gas pressure system of the pneumatic system. . Machine level and mechanical accuracy are regularly checked and corrected. There are two types of mechanical precision correction methods, soft and hard. The soft method is mainly compensated by system parameters, such as screw backlash compensation, machine tool reference position correction, etc. Hard methods are generally performed during machine overhaul, such as rail repair, ball screw nut pre-tightening adjustment Backlash and so on.
Good power supply guarantee In order to avoid large fluctuations in power supply (greater than ± 5%) and possible transient interference signals, high-speed machining centers generally use dedicated line power supply (such as from the low-voltage distribution room to separate one for CNC machine tools) or add stability. Pressure devices, etc., can reduce the impact of power quality and electrical interference. Formulate effective operating procedures In the use and management of CNC machine tools, a series of practical and effective operating procedures should be established. For example, lubrication, maintenance, rational use, and standardized shift system are the main contents of the use and management of CNC equipment. The establishment and observance of operating procedures is one of the important measures to ensure the safe operation of CNC machine tools. Practice has proved that many failures can be reduced or avoided by obeying operating procedures.
Stainless Steel Plate Cutting Mchine
1. It can be cut and processed, with high production efficiency, high speed, no deformation of the machined surface, no burr, especially suitable for occasions with high welding quality and efficiency requirements.
2. Wide range of applications.
3. Applicable materials: cast iron, cast steel, structural steel, tool steel, bearing steel, stainless steel, copper and copper alloy, aluminum and aluminum alloy, plastic and so on.
4. Wide range of applicable sizes
5. Multi-cut technology, the pipe is stationary, the tool rotates, and the safety performance is high.
6. With temperature rise protection, long motor life
7. The pipe is automatically centered during clamping and can be automatically fed. It is easy to operate.
8. The main motor adopts constant speed feedback regulation, and the process of cutting the groove is stable.
9. All specifications can realize automatic feeding function, easy to use
10. Lightweight design, light and easy to carry, on-site cutting has a unique advantage
The desktop CNC cutting machine is a CNC bench-top cutting machine structure. The whole machine work surface adopts the integral rim structure, which has the characteristics of stable and reliable operation and long service life. The model adopts optical axis linear guide and bilateral drive. It can realize the cutting of any metal materials according to any pattern, with good effect, no dross and burr, widely used for cutting carbon steel, low alloy steel, stainless steel, copper and copper all kinds of metal plate materials.
Stainless Steel Cutting Machine,Stainless Steel Plasma Cutting Mchine,Stainless Steel Laser Cutting Machine,Stainless Steel Plate Cutting Mchine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com