Incinerator Manufacturer for Dead Animal/Living Garbage/Medical /Marine Waste
OThis equipment is a kind of suitable for the hospital medical waste, life rubbish, dead animals, the villages and towns of urban garbage disposal and so on various aspects non-hazardous wastes treatment equipment.
2. Â Simple and convenient operation, high burning temperature and burning of organic matter removal rate was 99%, Fast burning speed, effectively.Covers an area of small, low cost, low malfunction,easy maintenance.
Specifications
2. Suitable for Medical Waste,Dead Animals,living garbage,etc.
3. High working efficiency.
FeaturesÂ
1. A combustion chamber temperature 650 ~ 850 ºC, fuel completely ashing, reduced capacity more than 97% or higher;The furnace heating up fast, fuel consumption, burning full.
2. 100% low excess air coefficient, using vortex combustion process.
3. Low temperature control system design, operation cost is low, the use of cold heat exchanger cooling process can realize resource recycling.
4. Cover an area of an area small, simple operation, convenient maintenance.
Scope
medical waste, dead animals, Marine garbage incineration or general enterprises of garbage, street leaves, town hospital, living garbage, laboratory waste etc.
Advantages
1. Long lifetime.
2. Totally enclosed operation.
3. Suitable for treating infectious waste.
4. Avoid secondary pollution.
5. Simple operation.
Incinerator operating process
1. Turn on the power switch, the power indicator is on.
2. Open water pump, return pipe yielding water, turnon the oil circuit switch.
3. Open the incinerator furnace door,fill into the flaming material, small living garbage incinerator, then close the door.
4. Turn on the induced draft fan.
5. Turn on the burner ignition switch.
6. When burnt out, turn off the burner ignition switch.After the temperature dropped to 50 degrees,turn off the oil circuit switch,the induced draft fan and the water pump, shut off the main power supply, open the door, remove the residue, clean it.
7. Special instructions, the operating process are strictly prohibited under the condition of high temperature shut down the pump and the burner fan.
Technological process(Take the case of animal whole-body burning)
1. Â Diseases of livestock and poultry body as a whole into the incinerator, start switch program by combustion engine combustion spontaneous combustion, the general temperature control in 650-850 degrees Celsius can the body to complete carbide spontaneous combustion.
2. A portion of the fuel particles in the process of combustion conditions restrictions non-flammable, so the device is equipped with a size exhaust gas purifier in the combustion state combustion until completely carbide.
3. Â Carbide after burning need to select site (away from the water and residential area) were buried, completely put an end to the spread of germs.
4. The operation of the incinerator control adopts automatic program control, reduce the labor intensity of workers, incinerator furnace door, the design of the slag discharge door adopt full sealed structure, burning furnace and totally isolated from outside the furnace, forming negative pressure combustion, put an end to the possibility of secondary pollution, especially for dangerous infectious medical waste treatment, more can reveal its unique advantage.
Incineration system
1.Furnace body is made up of refractory materials, insulation materials, insulation materials,   laying on the top of the cavity of grate outsourcing steel plate to prevent gas leakage and    the furnace body surface temperature is less than 50 ºC.In the furnace body is equipped with the access door side, auxiliary ignition burner on the side, too.The furnace body is equipped with work station.
2.Flue gas in the chamber of a stove or furnace from the bottom to wash the material, the moisture in the material drying, make material on fire in time. And arch before and after the refractory material accumulation of heat and radiation, so as to ensure the material combustion temperature.Prolong the residence time of flue gas, make the material and fly ash in the organic matter complete combustion, increase the destruction rate of harmful substances.
3.Furnace body in high temperature refractory lining, insulating material, is among the outer layer is a thermal insulation material, can reduce furnace body heat loss, improve the efficiency of burning;Appearance using steel plate as a protective layer to prevent air leakage;The refractory is developed by our company and building materials science research institute an acidic gas corrosion resistant, high temperature resistant, high strength refractory materials.
The main technical parameters
| Model | ZTFS-25 | ZTFS-20-25 | ZTFS-20-60 | ZTFS-20-120 | ZTFS-150-400 |
| Burning | dogs, cats | rat, rabbit, monkey, dog | chicken, duck, goose, birds | pig | pigs, horses, cattle |
| Processing (kg/batch) |
25 | 20-25 | 20-60 | 20-120 | 150-400 |
| Volume (m³) |
2.5 | 2.5 | 3.0 | 8.0 | 16.0 |
| Power consumption (kw/h) |
2 | 2-4 | 2-5 | 3-12 | 15-50 |
| Fuel consumption (L/h) |
3 | 3-10 | 3-12 | 4-15 | 20-60 |
| Equipment size (mm) |
2500×1500 ×1400 |
2300×1200 ×2100 |
2200×1300 ×2300 |
2500×2300 ×3000 |
3000×4000 ×2800 |
| Weight(t) | 1 | 3-8 | 4-8 | 4-12 | 15-45 |
What We Have Â
1. China Leading Producing Technology
2. Super High Quality
3. Competitive Price
4. Big Production Ability
5. Fast Delivery
6. Excellent Sale and After-sale Service
FAQÂ
1. Â Are you a factory or trading company?
We are a company specializing in the production of various kinds of shredding machine, crusher, excrement and urine processor for the equipment manufacturers.
2. Â Samples are available?
Yes, the sample for your test quality.
3. Â The product test before shipping?
Yes, all the equipment before delivery to commissioning, there is no problem of equipment to the factory.
4. After sale service?Â
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too.
5. How do you guarantee I can receive the goods that ordered after make the payment?Â
Please be rest assured that you will receive the goods in time, we are a legally established company supervised by the government, and is registered in customs of China and China Chamber of International Commerce. Besides, we are the golden member of MADE IN China. COM and has been checked by the third party as the real and legal company.
6. How to make the payment?Â
Normally, when the order value is below USD10, 000, we accept the payment by T/T or Western Union or Cash, L/C will be accepted when the order value is over USD10, 000. For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment.
7. Â I want to know more about your company and your products, how?
We will sent you a catalugue as well as a questionaire which covers your requiement. Your kindly reply about filling the questionaire will be greatly appreciated.
8.  Where are you? Can we go to China and visit your factory?
Yes, of course. We are in Weifang, China. Welcome to our factory.
Company brief introduction
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of " Quality first, service first, continuous improvement and innovation to meet the customers" For the management and " Zero defect, zero complaints" As the quality objective.
Customers to buy our company products are sold, is only the beginning of the relationship with our company, is the beginning of the after-sales service work, in the whole stage of customers to use the machine, we all after-sales service staff with thoughtful, meticulous, enthusiastic, timely service, let customers at ease, worry-free use of equipment, can really experience the our products bring convenience and create value for customers.
All equipment produced by our company can customize according to customer's requirements.
Thank you for your attention to our products, if you want to know more information, please feel free to contact us, we sincerely provide you with the most satisfactory service!
Main products
1.Incinerator
2.Pet Incineartor
3.Small Incinerator
4.Waste Incinerator
5.Marine Incinerator
6.Garbage Incinerator
7.Portable Incinerator
8.Medical Incinerators
9.Hospital Use Incinerator
10.Living Garbage IncineratorÂ
11.Animal Carcasses IncineratorÂ
12.Harmless Disposal IncineratorÂ
Â
Leisuwash Leibao 360 Automatic Car Wash
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
The newest LeisuWash inbay Automatic Car Wash raises the standard for Touchless Car Wash Equipment. With Revenue Enhancement and Total Cost of Ownership improvements being the main focus, this vehicle wash system delivers the industry`s best Return on Investment. Smart 360â„¢ Technology enables the car wash system to be responsive to the dynamic conditions in the wash bay and allows it to [think for itself", increasing up-time and optimizing the wash process.
Leisuwash 360,Leisuwash Leibao 360 Series,Smart Touchless Car Wash,Car Wash Leisuwash 360
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdautomaticcarwash.com