The V-type mixer equipment is suitable for the mixing of dry powdery and pelletized materials in pharmaceuticals, chemicals and foods. According to foreign advanced technology, it has been carefully developed and widely used in pharmaceutical, chemical, food and other industries. The use of gravity mixing, the material feeding pressure is small, high mixing uniformity, low power consumption, vacuum suction and sealing butterfly valve discharging convenient cleaning, using vacuum butterfly valve discharge, no leakage and dust flying.
It is suitable for the mixing of the powder and granular body with good material flowability and small difference in physical properties, and the mixing of materials with short mixing time requirement and short mixing time. Because the material flow in the V-shaped mixing container is stable, it will not destroy the original shape of the material. Therefore, the V-type mixer is also suitable for the mixing of the fragile and easily abradable granular materials, or the mixing of finer particles, blocks, and materials containing a certain amount of water.
Based on the advanced technology at home and abroad, the technicians independently develop new mixing and mixing equipment. The equipment is based on its excellent structure, reasonable design concept, and fine processing technology. In plastics, rubber, pharmaceuticals, dyes, food, and Chemicals and other industries are widely used for the mixing, stirring, drying and coloring of various materials. The V-type mixer is a horizontal groove-shaped single-slurry mixer. It is used in the pharmaceutical industry to mix pasty materials so that different materials are mixed evenly, and no dissolution, volatilization, or deterioration of the materials occurs during the mixing process.
Although China's V-type mixer is a sunrise industry, there are many bumpy development roads, and low-end is one of the difficulties that needs to be overcome. Many stakeholders in the industry have called on Chinese pharmaceutical equipment manufacturers to develop more V to meet the needs of the pharmaceutical industry. Hybrid equipment, especially hybrid equipment used in aseptic production, of course, to produce more advanced equipment, must learn new technologies and move toward automation.
Series Steel Structure Industrial Cooling Tower
Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.
Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,
gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.
Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.
Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.
Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.
Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.
Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com