SUNDI Series Advantage
- Working temperatures from -120ºC to +350ºC;
- Intelligent temperature control;
- Maximum process stability and reproducibility;
- Adop plate heat exchager,pipeline heating, the fastest heating and cooling rates;
- High cooling power from 0.5 to 1200KW;
- Large temperature range without fluid change;
- Closed system, extend thermal fluid lifetime;
- Comprehensive warning and safety functions;
- Rapid cooling down from high temperature (from 300ºC);
- Use magnetic drive pump, solve the circulation pump leakage
Product DescriptionÂ
| Model | SUNDI-835W | |
| Temperature range | -80ºC~250ºC | |
| Control Mode | Feedback PID + Our special dynamic control calculation, PLC controller | |
| Temp.control | Option:Process temperature control mode or jacket oil temperature control | |
| Temp. difference | Set or control the temperature difference between jacket oil and raw material process | |
| Program Editor | 20 programs, each program can edit 45 steps. | |
| Communication Portocol | MODBUS RTU Protocol,RS485 interface | |
| Temp. feedback | The temperature of four points: the inlet and outlet of heat-conducting medium, heater and material in reactor(External temperature sensor) |
|
| Temp. accuracy | ±1ºC | |
| Heating power | 3.5kw | |
| Cooling capacity | 250ºC | 3.5kw |
| 100ºC | 3.5kw | |
| 20ºC | 3.5kw | |
| 0ºC | 3.5kw | |
| -20ºC | 3.5kw | |
| -40ºC | 2.55kw | |
| -60ºC | 1.4kw | |
| -75ºC | 0.42kw | |
| Circulation pump | Max35L/min 1bar | |
| Compressor | Tecumseh | |
| Expansion valve | Danfoss | |
| Oil separator | Emerson | |
| Evaporator | KAORI plate heat exchanger | |
| Operation Panel | 7-inch color touch screen controller, temperature curve record, data export to Excel format |
|
| Safety protection | Self-diagnosis function; freezer overload protection; high pressure switch, overload relay, thermal protection device, liquid low level protection, high temperature protection and temperature fault protection. |
|
| Closed circulation system | The whole system is full closed circulation, there is no oil mist at high temperature and no water vapor at low temperature, pressure do not rise up when system is running. The system will supply oil automatically at low temperature. |
|
| Refrigerant | R-404AÂ R23Â | |
| Connection size | DN20 or M30*1.5 | |
| Water-cooled type W (cooling water@20ºC) |
1200L/HÂ 1.5bar~4bar | |
| Dimension(mm) | water-cooled | 550*700*1650 |
| Weight | water-cooled | 285kg |
| Power | ACÂ 380VÂ 50HZÂ 10kw(Max) | |
| Case material | SUS 304 | |
| Optional | Optional Ethernet interface, configure the computer operating software | |
| Optional | Optional outside touch screen display controller(separated),the communication line distance is 10 meter. |
|
| Optional Power | 220V 60HZ three-phase, 440V~460V 60HZ three phase | |
Power Presses drives the flywheel by motor, drives the crankshaft connecting rod mechanism by clutch and transmission gear to move the slider up and down, and drives the tensile mold to shape the steel plate.And the power press has two sliders, divided into sliding block inside and outside the slider, within the slider drive mould punch or die, outside the pressure of the slider to drive mould to coil, pressure rim first action during tensile steel edge, inner sliding block action stretch again.
power presses is used for blanking, punching, bending and forming of small and medium-sized single-engined thin steel plates and high-speed progressive die parts. It is characterized by high-precision, high-yield and high-stability continuous stamping operations.
Power Presses
Mechanical Presses,Power Press Machine,Presses Machine,Stamping Press,Punching Lines,Hydraulic Press,Punching Press Machine
Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com