Concrete mixer operating precautions
Concrete mixers may have all been seen, and its operation is not that simple. It would be better for us to take a look at them first, which will help your concrete mixer to work properly.
Here are the precautions for the operation of concrete mixers:
1. Before starting, the stirring lever should be placed in the “neutral†position.
2. After start-up, the stirring lever should be placed in the “unloading†position and the water in the cylinder should be drained.
3, before transport, discharge chute must be fixed in the "travel" position to prevent swinging.
4. When loading, the mixing rod should be placed in the "Loading" position.
5. When the person enters the barrel to clear the agglomeration, the vehicle shall be turned off, the key of the switch shall be removed, and the peripherals shall be monitored.
6, do a good job in civilized construction, the excess material in the barrel is not allowed to casually fall. After the unloading, the mixing drum, feed trough, idler and other parts must be cleaned.
7. Before starting, you should carefully check the various parts of the mechanical system and confirm that it can be started after confirming good conditions.
8. When operating the joystick, stop at the “neutral†position before moving to the next position.
Twift Off Lug Lids,Customized Lug Lids,Twist Off Caps,Twist Off Lug Caps
CHANGZHOU AVEC PACKING TECHNOLOGY CO., LTD , https://www.avecintl.com