The emergence of cars has greatly facilitated people's travel. With the continuous development of China's economy and people's growing awareness of cars, car safety has become a focus of concern. In recent years, the country has also strictly regulated the car's defect recall system, and its credibility has been further enhanced.
In May, a number of models of 12 brands in China released recall notices, including car brands including Aston Martin, Mercedes-Benz, Lexus, Citroen, Volkswagen, Kia, Maserati, Chevrolet, Buick, Jaguar, Ford and JEEP. It reached a record high of 2.26 million vehicles.
Top1: Shanghai GM models
The recall of vehicles in May involved 2.26 million vehicles, all of which were foreign brands.
On May 26, SAIC General Motors Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to recall some of the third generation 1.6 from August 15, 2016. L and 1.8L naturally aspirated engines for a total of 2,160,779 vehicles, as follows:
1. Some of the 2010-2015 models, which were produced from July 21, 2009 to August 28, 2015, were 833,922 vehicles;
2. Some of the 2009-2016 Chevrolet Cruze produced from February 14, 2009 to April 27, 2016, with a total of 1,149,655 vehicles;
3. The number of Chevrolet scenic spots for the period 2010-2015, which was produced from July 1, 2009 to December 24, 2014, was 158,965;
4. Some of the 2012-2015 Chevrolet Aiwei Europe cars produced from March 2, 2011 to March 2, 2015, number 18,237.
A total of 2,160,779 vehicles
Reasons for recall: The corrosion resistance of the crankcase ventilation valve diaphragm of some vehicles in this recall range is insufficient. After long-term use, the diaphragm may be corroded. In extreme cases, the engine may be damaged and there is a safety hazard.
Solution: SAIC General Motors Co., Ltd. will replace the crankcase ventilation valve for vehicles in the recall range to eliminate safety hazards.
Top2: Maserati (China)
The recall of vehicles in May involved 2.26 million vehicles, all of which were foreign brands.
On May 25th, Maserati (China) Automobile Trading Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall the production from March 22, 2013 to October 29, 2015, starting from June 13, 2016. Imported President and Geberit series of cars, according to the company's statistics, a total of 19,700 vehicles in mainland China.
Reason for recall: The tightening screw design of the fixing screws of the front wheel toe adjustment lever of some vehicles in this recall range is insufficient, and the strength of the connection between the rear wheel toe adjustment lever and the rear wheel bearing bracket is insufficient. The above problems may cause the connection tightness between the front wheel adjustment lever and the rear wheel bearing bracket of the vehicle to decrease, thereby affecting the positioning setting of the rear wheel of the vehicle and causing the rear part (suspension part) of the vehicle during driving. Abnormal noise may cause the vehicle to lose control and pose a safety hazard.
Solution: Maserati (China) Automobile Trading Co., Ltd. will check the tightening torque and state of the fixing screws of the rear wheel toe adjusting lever of the vehicle involved in the recall, and take the following measures to eliminate the defect according to the inspection result: if the tie rod is fixed If the screw is not loose, you need to replace the tie rod fixing screw (with threaded glue) and its washer, and increase the torque applied to the tie rod fixing screw; if the tie rod fixing screw has been loose or worn, you need to replace the rear wheel bearing bracket ( Rear shofar), rear wheel toe adjustment lever, tie rod fixing screw (with threaded glue) and its washer, and increase the torque applied to the tie rod fixing screw.
Top3: Lexus (China)
The recall of vehicles in May involved 2.26 million vehicles, all of which were foreign brands.
On May 12, Toyota Motor (China) Investment Co., Ltd. filed a recall plan with the AQSIQ, and will recall some imported Lexus ES200 vehicles from May 13, 2016, with the production date of July 07, 2015 - April 05, 2016. According to statistics, 19,529 vehicles are involved in mainland China.
Reason for recall: The vehicle within the scope of this recall is not perfect due to the procedure for controlling the EGR (exhaust gas recirculation) valve in the engine control computer. In some cases, the engine may be turned off, causing the rear vehicle to catch up and induce an accident. There is a safety hazard. .
Solution: Toyota Motor (China) Investment Co., Ltd. will freely check and upgrade its engine control computer program for all target vehicles to eliminate potential safety hazards.
Top4: Chrysler (China)
The recall of vehicles in May involved 2.26 million vehicles, all of which were foreign brands.
On May 13, Chrysler (China) Automobile Sales Co., Ltd. filed a recall plan with the AQSIQ. It will recall some of the imports from January 4, 2013 to July 11, 2014, starting from June 10, 2016. 2014 free light model. According to the company's statistics, a total of 13,676 vehicles are involved in mainland China.
Reasons for recall: Some vehicles in this recall range accumulate static electricity on the front windshield due to the friction between the wiper strip and the front windshield. The power module transmitted to the BCM through the wiper motor may cause the wiper to work. ,There are security risks.
Solution: The company will replace the damaged module for the above-mentioned affected vehicles, and add a grounding coil to the affected vehicles to avoid static electricity accumulation and eliminate defects.
Top5: Ford Motor
The recall of vehicles in May involved 2.26 million vehicles, all of which were foreign brands.
On May 27, Ford Motor (China) Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall the production from January 17, 2014 to May 31, 2014, from October 31, 2016. According to the company's statistics, there are 6,251 vehicles in the mainland.
Reason for recall: The front suspension link arm of the rear suspension of the vehicle may have poor welding quality, which may cause the front suspension link arm to break. The rear suspension link arm breaks during the running. It will cause the steering control to fail, increasing the risk of collision and posing a safety hazard.
Solution: The company will disassemble and replace the rear suspension front arm of the vehicle involved in the recall to eliminate the hazard.
Feed Additive,Oral Liquid Vitamin,Pig Muscle Enhancer,Cattle Sheep Fat Increase
Shangqiu Meilan Biological Engineering Co.,Ltd , https://www.melanvaccine.com